1. Manuals
  2. Brands
  3. KWorld Manuals
  4. Set-top boxes
  5. TV BOX WS
  6. User manual

KWorld TV BOX WS User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Subpart J of Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that which the
receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
To assure continued FCC compliance the user must use grounded power supply core
and the provided shielded video interface cable with bonded ferrite cores.
If a BNC cable is going to be used, use only a shielded BNC(5) cable. Also,
any unauthorized changes or modifications no expressly approved by the party
responsible for compliance could void the user's authority to operate this device.
© Copyright 2005 Vision® Ver 1.0
All brand names and trademarks are the registered property of their respective
owners.

FCC Information

FCC Warning
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TV BOX WS and is the answer not in the manual?

Questions and answers

Related Manuals for KWorld TV BOX WS

Summary of Contents for KWorld TV BOX WS

  • Page 1: Fcc Information

    FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Subpart J of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 2: Table Of Contents

    Table of Contents 1. Introduction 1-1. Features………………………………………………….……01 1-2. Specification…………………………………………….….…01 1-3. Package Contents……………………………………….…….02 1-4. Location of Controls (Box Set)……………………………….03 1-5. Location of Controls (Remote) ………………………………04 2. Set Up 2-1. Connecting TV Antenna/Cable………………………….….…05 2-2. Connecting Video Out To Monitor …….……………….…….05 2-3. Connecting Video Input From PC……………………….…….06 2-4.

  • Page 3: Introduction

    1.Introduction Congratulation! You have purchased the KWORLD TV BOX WS to enhance your multimedia PC. We will guide you through all of the features installation and operation. This manual will help you use the many exciting and useful features to make your TV viewing more enjoyable than ever before.

  • Page 4: Package Contents

    1-3.Package Contents KWORLD TV BOX WS VGA cable 3.5mm mini Stereo Audio cable Remote controller Batteries DC 5V power adapter User’s manual TV BOX WS Remote control VGA Cable Power Adaptor Stereo Audio Cable AAA Batteries Check to make sure that all the components are present and that nothing is damaged during shipping. If you...

  • Page 5: Location Of Controls (Box Set)

    1-4.Location of Controls (Box Set) Game Console Video Camera DVD Player Front Panel Power Adapter Power Adapter Power ON/OFF Input Source Change VGA output to CRT/LCD Channel+ Channel- Volume+ VGA input from PC Volume- Audio Line output to Speaker Audio in from PC UHF/VHF antenna RF input device Rear View...

  • Page 6: Location Of Controls (Remote)

    1-5.Location of Controls (Remote) [POWER]: Power button [RESOLUTION]: Change the Video Resolution [INPUT]: Change Video Source [PC/Video]: Select PC or Video [Sleep]: Sleep Time Select button [0~9]: Channel Number buttons [Recall]: Channel Recall button [Select]: Confirm Setting or OSD show up ]: Adjusting Picture Quality [EXIT]: Exit Select key or Menu button [Menu]: Select Item for Adjusting Function...

  • Page 7: Set Up

    2.Set Up 2-1.Connecting TV Antenna/Cable You can use either an indoor or outdoor antenna to VHF and/or UHF channels. You can receive Cable TV by connecting a cable supplied by your local cable company。 75 ohm coaxial cable TV signal input 300 ohm twin-lead VHF, UHF or Cable TV Antenna...

  • Page 8: Connecting Video Input From Pc

    2-3. Connecting Video Input from PC VGA (D-sub) VGA input VGA cable 2-4.Connecting Audio Line Input/Output Speaker Audio Cable Audio out Audio Cable Audio in Line in...

  • Page 9: Connecting Power Supply

    2-5. Connecting Power Supply DC 5V Input AC/DC Adapto 2-6. Connecting Audio/Video Equipment Video Source Input Right Audio Channel Input Left Audio Channel Input S-Video Source Input Front View...

  • Page 10: Operation 3-1.Watching Tv Programs

    3.Operation 3-1.Watching TV Programs ※To select channel Press POWER button to turn on or turn off. Select a channel in one of the following two ways. To scan the memorized channels in numerical sequence: Press CH+ to select the next higher channel. Press CH- to select the next lower channel.

  • Page 11: Convenient Remote Functions

    ※ To mute the sound Press MUTE button to mute the sound. The mute icon will be displayed on the screen. To restore the sound, press MUTE button again, and the mute icon will disappear. Note: In TV mode, you can press button to adjust volume.
  • Page 12 ※To change video resolution When you press RESOLUTION button each time, the 800x600,1024x768, 1280x1024 etc. resolution will be automatically changed by loop on any video mode (e.g. TV, AV, S-VIDEO etc. mode). Note: Press Menu button to resolution 1440 x 900, if your display no support this mode, for example the screen show “...
  • Page 13 ※ FAVORITE(FAV) Channel Memory Setting The favorite channel setting function provides 9 channels for setting your own favorite channels. You can set your favorite channel from your remote control unit. 1. Choose the channel and press FAV button on the remote control, then “FAVORITE“menu will pop up.

  • Page 14: Adjusting The Picture

    3-3.Adjusting the Menu Main Menu Press the Menu button on the remote control, to set up and exit the main menu or submenu on screen. Then you can use the " ↑ " or " ↓ " key,，select your items, than press Select button into submenu to adjustable by o make a selection.
  • Page 15 Press the “Select” button to choose the “OSD Position”, and use “↑ “” ↓ " " " " " buttons to move the position of menu OSD Position position on the display..After setting, press the “Exit” button to return to the OSD Setting sub-Menu.

Table of Contents