Table of Contents
Advertisement
2.3.
Camera Connector Signals
The MDR-26 video connector signal assignments comply with the Camera Link "base"
configuration. The camera connector signal assignments correspond to the frame grabber
interface defined in the Camera Link Specification. Conversely, the frame grabber
connector assignments are as defined for the camera interface in the Camera Link
Specification. This arrangement provides compatibility with standard Camera Link
cables.
Table 2-2 identifies the signal assignments for the MDR-26 video connectors.
2.3.1.
Cable Shield Grounding
Camera and frame grabber cable "outer" shields are connected to the CLV-411
aluminum case. The case is isolated from the CLV-411 circuitry and the cable
"inner" shields.
The frame grabber cable "inner" shield connects to circuit digital ground, maintaining
signal reference levels between the CLV-411 and the frame grabber.
13
Advertisement
Table of Contents
