Emission Control; Description - Echo Power Pruner PPT-266H Operator's Manual

8
e c
mIssIon ontrol
EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM (engine
modification) and, if the second to last character of the
Engine Family on the Emission Control Information label
(sample below) is "C", "K", or "T", the emission control sys-
tem is EM and TWC (3-way catalyst). The fuel tank/fuel line
emission control system is EVAP (evaporative emissions).
Evaporative emissions for California models may only be
applicable to fuel tanks.
An Emission Control Label is located on the engine.
(This is an EXAMPLE ONLY, information on label varies
by engine FAMILY).
PRODUCT EMISSION DURAbILITy (EMISSION COMPLIANCE PERIOD)
The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emis-
sions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as
listed in the Maintenance Section of this manual.
d
escrIptIon
Locate this safety decal on your unit. Make sure the decals are legible and that you understand and follow the instruc-
tions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING
instructions for specific information.
19
18
17
(
&
eXhaust
13
21
20
)
evaporatIve
14
15
22
16
Hot Decal (near muffler)