Advertisement
Working Current:
Battery:
Audio Input:
Working Temperature:
[Getting to know the Blue Sky 5001]
1. Function Principle:
This product is designed for use in a car, where a charging source (DC12V) and a FM
radio transmission are available. Make sure the FM frequency of the kit is the same
as the car FM radio when operating.
2. FM Function Mode:
Two optional FM transmitting modes, Mode R and Mode B.
1) Mode R: Picks up the voice from the car radio and uses the FM frequency set;
automatically activates the Bluetooth function when a call is incoming, and sends
the voice to the car radio enabling a conversation.
2) Mode B: Plays music, which inputs from the 2.5 mm jack; automatically activates
the Bluetooth function when a call is incoming, and sends the voice to the car radio
enabling a conversation.
3. Operation kinks:
1)
Plugging in the host into the car charging source will result in the LED panel to
display the current mode of the host (default Mode R), then it will display the
FM frequency of the kit;
2)
Pairing and connecting the Bluetooth headset with your mobile phone and
plugging it into the groove of the host will result in the LED light to be red
showing the headset is on and is charging;
3)
Setting the FM frequency: Press "Up" or "Down" to set different frequencies
and press "OK" to complete the setting. (It will generate 100KHz by pressing
"Up" or "Down" once, and will be up or down every 0.5 seconds by holding
down the "Up" or "Down" buttons respectively.);
4)
Mode-selecting: Press the Frequency Setting Key and hold it down for about 5
seconds, until the red LED on the host flashes for 5 seconds, indicating the
2.5MA
Rechargeable Lithium Polymer Ion
2.5mm jack for Audio Input
-15~50 degrees
Advertisement
