Advertisement
Table of Contents
BUNN® 1.5 GALLON
THERMAL SERVER
On this card you will find directions for operating, cleaning and repairing minor problems you may have with
your Thermal Server. By regularly cleaning your servers and using the trouble shooting guide you will ensure
consistent quality in the cup with little or no downtime.
INSTRUCTIONS
Always pre-heat server(s) with hot water for at least 10 minutes before using.
Rinse inside of server between each batch. Or at the end of the day run a batch
into server without coffee and close lid and server is ready to go the next morning.
1
2
3
Insert stem with brew through lid
into server and twist to tighten.
Screw lid to the left to remove brew
through lid from brew through spout.
After brew is complete put on lid and twist
to the right to tighten to transport and or
retain heat.
1
Advertisement
Table of Contents
Summary of Contents for Seattle's Best Coffee BUNN 1.5 Gallon
- Page 1 BUNN® 1.5 GALLON THERMAL SERVER On this card you will find directions for operating, cleaning and repairing minor problems you may have with your Thermal Server. By regularly cleaning your servers and using the trouble shooting guide you will ensure consistent quality in the cup with little or no downtime.
- Page 2 BUNN® 1.5 GALLON THERMAL SERVER CLEANING Wipe exterior once a day with warm non-abrasive towel. Clean sight glass with provided brush once a week. Unscrew sight glass cap to insert sight glass brush. Insert sight glass brush and move up and down several times to clean.
Need help?
Do you have a question about the BUNN 1.5 Gallon and is the answer not in the manual?
Questions and answers