EKF CompactPCI CG2-SHANTY User Manual

Gps receiver

Advertisement

Quick Links

User Guide
CompactPCI
®
CG2-SHANTY •
GPS Receiver
Document No. 3775 • Edition 4
2006-03

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CompactPCI CG2-SHANTY and is the answer not in the manual?

Questions and answers

Summary of Contents for EKF CompactPCI CG2-SHANTY

  • Page 1 User Guide CompactPCI ® CG2-SHANTY • GPS Receiver Document No. 3775 • Edition 4 2006-03...
  • Page 2: Table Of Contents

    Literature ............. 31 - 2 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 3: About This Manual

    This manual has been edited as carefully as possible. We apologize for any potential mistake. Information provided herein is designated exclusively to the proficient user (system integrator, engineer). EKF can accept no responsibility for any potential damage caused by the use of this manual.
  • Page 4: Cg2-Shanty Features

    Vibration 1g 5-2000Hz < MTBF tbd h specifications are subject to change without further notice - 4 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 5: Short Description

    GPS based clock is preferable. board is the perfect and affordable choice. - 5 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 6 As an option, the SiRF binary raw data protocol allows much higher throughput. - 6 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 7: Block Diagram

    & Parallel Port J-SP2 Optional CU-Module Serial Serial Connectors Port 3 Port 4 - 7 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 8: Top View Component Assembly

    J-BAT GPS Receiver BATT Module LED1 © EKF J-SP2 ekf.com © EKF CG2-SHANTY - 8 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 9: Front Panel

    CG2-SHANTY • CompactPCI GPS Receiver/Clock Front Panel CG2- SHANTY - 9 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 10: Front Panel Elements

    TTL time mark pulse 1Hz and 10kHz, synchronized to the UTC Universal Time (Coordinated) (Optional) - 10 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 11: Installation

    Store the board only in its original ESD protected packaging. Retain the original packaging (antistatic bag and antistatic box) in case of returning the board to EKF for rapair. - 11 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany...
  • Page 12: Installing The Board

    Lock the ejector lever, fix screws at the front panel (top/bottom) Retain original packaging in case of return - 12 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 13: Jumper Configuration & Factory Defaults

    WARNING: unmatched JANT settings may destroy antenna check setting anytime before connecting GPS antenna - 13 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 14 Optional, one single row 2-pin header (JMP_COM) is provided to enable/disable the onboard RS232 transceiver. JMP_COM removed Transceiver disabled Transceiver enabled (optional) - 14 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 15: Removing The Board

    Do not expose the card to fire. Battery cells and other components could explode and cause personal injury. - 15 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 16: Emc Recommendations

    CDSFA 15 165 X 12979 X (DB15) CDSFA 25 165 X 12989 X (DB25) - 16 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 17: Replacement Of The Battery

    Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. Do not expose a battery to fire. - 17 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 18: Technical Reference

    LED visible from the CG2-SHANTY boards front panel. - 18 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 19: Serial Ports & Protocols

    The binary protocol also allows for defining higher bit rates on both serial interfaces. Please contact EKF when you need the binary protocol feature. The secondary (auxiliary) serial port of the Jupiter module is configured as a half duplex input at 9600bps, no parity, 8 data bits, one stop bit.
  • Page 20: Antenna Connector

    WARNING: unmatched JANT settings may destroy antenna check setting anytime before connecting GPS antenna Heavy Duty Airborne GPS Antenna - 20 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 21: Jupiter Module Socket

    EEPROM (if valid), else falls back to its ROM stored parameters, default - 21 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 22: Jumper Jutc, Time Mark

    CMOS level output, synchronized to the utctmark pulse. - 22 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 23: Additional Documentation

    CG2-SHANTY • CompactPCI GPS Receiver/Clock Additional Documentation In addition to this manual, EKF provides detailed on-line information regarding the Jupiter receiver module (PDF documents). Also use the Navman homepage for most recent information: http://www.navman.com Document Title URL http:// Jupiter 21 GPS Receiver www.ekf.com/c/cgps/cg2/inf/jupiter21_datasheet.pdf...
  • Page 24: Serial Interfaces

    (internal) serial interface, and RXD only of the second serial interface. CG2- SHANTY - 24 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 25: Connector Sp2

    The signal RXD (typically data from external DGPS receiver) can be observed from an indicator LED mounted in the front panel of the CG2-SHANTY. - 25 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 26 D-SUB 9 complete cable assembly available EKF part no. 280.7.201 - 26 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 27 CG2-SHANTY: female connector WZ WFE97 DGPS: male connector cable is included with DGPS receiver - 27 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 28: Compactpci ® Interface

    BIOS running on a host system detects these PCI devices at boot time. - 28 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 29: System Connector J1

    (no key). The CG2-SHANTY is suitable for V =3.3V and V =5V and therefore not equipped with any coding key. - 29 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 30 Pin positions printed italic/gray: Not connected TDI/TDO internally connected together +5V/+12V/-12V not required - 30 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 31: Literature

    ILI Index House, GB SL57EU AMP, FCI Ascot Berkshire 2.54mm DIN 41651 Beuth Verlag, Berlin Shrouded Headers - 31 - EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com...
  • Page 32 CG2-SHANTY • CompactPCI GPS Receiver/Clock EKF Elektronik GmbH Fax. +49 (0)2381/6890-90 Philipp-Reis-Str. 4 Tel. +49 (0)2381/6890-0 59065 HAMM Internet www.ekf.com Germany E-Mail info@ekf.de...

Table of Contents