Safety Precautions - CBC HSW-H30 Installation And Operating Instructions Manual

SAFETY PRECAUTIONS

CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol indicates the presence of
uninsulated "dangerous voltage" with-
in the product's enclosure. This may
constitute a risk of electric shock.
The user should consult the oper-
ating and maintenance (servicing)
instructions in the literature accom-
panying the appliance.
Attention: Installation should be performed
by qualified service personnel only in accor-
dance with the National Electrical Code or
applicable local codes.
Power Disconnect. Units with or without
ON-OFF switches have power supplied to the
unit whenever the power cord is inserted into
the power source; however, the unit is opera-
tional only when the ON-OFF switch is in
the ON position. The power cord is the main
power disconnect for all units.
1 UNPACKING
Unpack carefully. This is electromechanical equipment and
should be handled with care.
Check for the following items:
• Verify the unit model number.
• Verify that parts listed below have been included.
HSW-H30 – Height Strip w/ one color camera and 3.0mm
lens, white housing.
Hardware Kit
5 x Cable Ties
5 x Cable Tie Mounts
3 x Plastic Wall Anchor
3 x No. 8 cross recessed self-tapping screw, 1-1/2" length
1 x Barrel Plug Connector, 2.1mm pin, 36" length,
stripped leads
CAM-HS30 – Accessory color camera w/ 3.0mm lens.
Hardware Kit
1 x 12VDC 0.5 Amp Power Adapter, 6-foot cord
1 x M3 Nylon Lock Nut
1 x Flat Washer
MT-HS – Accessory Wall Bracket to turn the Height Strip
90° Left or Right
3 x M4 Screw, Pan Head Cross Recessed
3 x M4 Lock Nut
Equipment Required
5.5mm or 7/32-inch Nut Driver (or Socket)
7.0mm or 9/32-inch Nut Driver (or Socket)
#2 Cross Recessed Screwdriver
Wire Cutters / Scissors
Level
Drill with 3/8" bit
Optional: Step drill bit or 1/8", 3/32", 3/16", 1/4", 3/8"
bits
Optional: De-burr tool
Note: Optional items listed above are for use with side-
mounted cameras. See Installation section.
If an item appears to have been damaged in shipment,
replace it properly in its carton and notify the shipper. If
any items are missing, notify CBC (America) Corp. Sales
Representative or Customer Service. The shipping carton is
the safest container in which the unit may be transported.
Save it for possible future use. Verify that the parts listed as
follows have been included.
3