Make A Video Call - Nokia 6267 User Manual

Make a video call

■
During operation, for example, during an active video call or highspeed
data connection, this device may at times feel warm. In most cases, this
is normal, not a fault. If you suspect the device is not working properly,
take it to the nearest authorized service facility for service.
When you make a video call, you send a real-time video to the recipient
of the call. The video image captured by the VGA camera above the main
display, is shown to the video call recipient.
To be able to make a video call, you must have a USIM card and be connected
in a WCDMA network. For availability of and subscription to video call services,
contact your service provider. A video call can only be made between two
parties. The video call can be made to a compatible phone or an ISDN client.
Video calls cannot be made while another voice, video, or data call is active.
1. To start a video call, enter the phone number in the standby mode,
or select Menu > Contacts and a contact.
2. Press and hold the call key, or select Options > Video call.
Starting a video call may take a while. Video call and an animation
are shown. If the call is not successful (for example, video calls are
not supported by the network or the receiving device is not compatible)
you are asked if you want to try a normal call or send a message instead.
Tip: To increase or decrease the volume during a call, press
the volume keys.
The video call is active when you can see two video images and hear the sound
through the loudspeaker. If the call recipient denies the video sending, you
may see a still image or a grey background graphic. You will hear the sound.
3. To end the call, press the end key.
27