Page 1
Pay special attention to the information in order to know and understand the operation and the conditions of use of the PMC Air Dryer. All of the information is aimed at improving user safety and avoiding possible breakdowns...
Defective in material or workmanship, it is Customer’s responsibility to contact PMC and return the Product to PMC as directed by PMC, freight prepaid. If PMC determines that the Product is Defective and that such Defect is covered by this Warranty, PMC will credit Customer for the reasonable freight charges incurred by Customer in returning the Defective Product to PMC, and PMC (or its authorized agent) will, at PMC’s option, repair or replace...
Page 3
No Rights Implied: Nothing in the sale, lease or rental of any Product by PMC shall be construed to grant any right, interest or license in or under any patent, trademark, copyright, trade secret or other proprietary right or material owned by anyone;...
AIR DRYER SERVICE MANUAL TABLE OF CONTENTS Warranty ……………………………………………………………………………………….. Safety and Handling …………………………………………………………………………. Specifications............………………………………………. General Description…………………………………………………………………………… Operating Procedures………………………………………………………………………… Operation………………………………………………………………………………………… 10 Maintenance…………………………………………………………………………………….. 11 Parts ID…………………………………………………………………………......12 Parts Listing ……………………………………………………………………………………. 13 Drum Adapter Parts ID and Part Numbers ………………………………………………… 14 - 4 -...
Keep this Operations Manual for future consultation of useful information at all times. If you lose this manual, ask for a new copy from your PMC Service Center, directly contact PMC or on line at our web site (www.polymac-usa.com).
Page 6
The following safety guidelines are applicable to the safe and efficient use of the PMC Air Dryer. Warning: Do not remove the Metal Bowl Guard. Do not operate the unit without theMetal Bowl Guard installed to minimize the danger of flying fragments in the even of plastic bowl failure.
Air Dryer Service Manual SPECIFICATIONS Specifications: Maximum Inlet Pressure 150 PSI Maximum Outlet Pressure 3 PSI Maximum Air Temperature 125 Degrees F Desiccant Capacity 1.6 lbs Maximum Air Flow 10 CFM @ 100 PSI Dew Point -45 Degrees F Drying Capacity @ 70 Degrees F Saturated Air Approximately 300 Drum Sets @ 100 Degrees F Saturated Air...
Set Up: Install the main air shutoff valve and a main air line filter ahead of the PMC Air Dryer. The main air shut off valve will provide shutoff of the main air system for servicing of the PMC Air Dryer.
Always determine that the pressure regulator is off (full counter clockwise) before turning on the Main System Air to the PMC Air Dryer. Failure to do so could cause a pressure surge, which could damage the supply drum and cause injury to the operator.
Certain compressor oils and fumes will attack the plastic bowl and cause bowl failure. Do not use the PMC Air Dryer near these materials. When the bowl becomes dirty, replace it or wipe it with a clean, dry cloth. Re-install the metal bowl guard. Immediately replace any crazed or cracked, damaged or deteriorated platic bowls.
AIR DRYER SERVICE MANUAL PMC AIR DRYER DRUM ADAPTER- Part # AD-17 Part Number Description Quantity AD-13 Pipe AD-15 Reducing Nipple RM-PAR216P4 Nipple PU-04000-82 Shut Off Valve GU-04021 Quick Disconnect; Female GU-04022 Quick Disconnect; Male - 14 -...