Step Counting Mode; Distance Mode; Calories Mode; Stopwatch Mode - barigo stepTrack 7 Manual

Step Counting Mode

- Press S button , and see the "STEP" on display.
- You can see the number of step you are walked on
the display
- Press and hold S for  sec to enter the adjust
mode for KM/ Mile. You can press S or S to
switch the KM / MILE icon. Press S to confirm.
- Press S button to Reset the steps

Distance Mode

- Press S button to enter Distance mode ,
either "KM" or "MILE" icon will show.
- Press S to switch Km <-> Mile
Set Stride :
- Press and hold S for  sec.
To enter the stride adjust mode
- You can press S or S to adjust the stride distance
(cm /  inch resolution)
- Press S to confirm

Calories Mode

- Press and hold S for  sec.
To enter the weight adjust mode
- You can press S or S to adjust the weight
( kg /  Lb. resolution)
- Press S to confirm
UK-

Stopwatch Mode

- Press S button , and see the "STW" on display .
- Press S to "Start" Stopwatch ,
press S again to "Stop" stopwatch.
- Press S to "Clear" the data
- Or you can press S during the stopwatch is
started, for "Split" timing display.
- Press S to resume.

Motion Sensitivity Slide Switch

Release the battery compartment by unscrew
the secure screw and slide out the battery
compartment. Inside you will find the motion
sensitivity slide switch.
To fit the unit more or less sensitive to your
individual walking pattern, please reposition the
motion sensitivity slide switch accordingly.
motion
sensitivity
switch
UK-9