Troubleshooting - HoMedics m? User Manual

Troubleshooting

Indicator
No lights are on
All elōs energy level lights are
blinking
elōs activation button is
blinking
Power light is blinking orange
No light flashes from cartridge
treatment window .
18
me ˉ
HOMEDICS
What does it mean
Control Panel
Power cable is not connected
No elōs energy level was
selected .
elōs energy level was
selected. elōs activating
button flashes to indicate that
it needs to be pressed .
An error has been detected
1 . RF skin contact bars not
in contact with the skin in
treatment area .
2 . Cartridge activation button
is n ot pressed .
How to react
Connect power cable
Select an elōs level. The
applicator fan will start blowing
indicating that the cartridge is
active .
Press the cartridge activation
button . The applicator fan will
start blowing indicating that the
elōs cartridge is active.
Reset:
1 . Disconnect power cord .
2 . Wait until all lights are off (up
to 2 minutes).
3 . Reconnect the power cord
and turn system on .
4 . Move to a cooler area with a
room temperature of less than
86 degrees Fahrenheit (30
degrees Celsius) and restart
the system .
In order for the system to flash
pulses, make sure all 3 conditions
are met: RF skin contact bars
in contact with skin, cartridge
activation button on, elōs level
selected .