Do you have a question about the 8 Litre Urn KUR10 and is the answer not in the manual?
Questions and answers
Bronia Sharp
February 17, 2025
How to descale urn
1 comments:
Mr. Anderson
February 17, 2025
To descale the Kambrook 8 Litre Urn KUR10, follow these steps:
1. Fill the urn until it is 2/3 full with a solution of 1 part vinegar and 2 parts water. 2. Boil the solution and allow it to stand overnight. 3. Empty the solution from the urn. 4. Fill the urn with clean water, bring it to a boil, and then discard the water to remove any remaining residue.
Alternatively, a commercial kettle descaler can be used, which is available from most supermarkets, department stores, and hardware stores.
Summary of Contents for Kambrook 8 Litre Urn KUR10
Page 1
Kambrook 461 Plummer Street, Port Melbourne 3207, Australia Customer Service Line (free call) 1800 800 634 Customer Service Fax 1800 621 337 Kambrook New Zealand, Private Bag 94411, Greenmount, Auckland, New Zealand Customer Service Line/Spare Parts 09 271 3980 Customer Service Fax 0800 288 513...
Page 2
KAMBROOK SAFETY Do not touch hot surfaces. Use handles for lifting and carrying the appliance. Welcome to Kambrook and your new 8 Litre Urn. At Kambrook, we believe that Always use the appliance on a dry, the safe performance is the first priority level surface.The urn is not intended...
Page 3
(recommend setting cease use of the appliance and return unit ‘2’ or ‘3’ for tea or coffee). to the nearest authorised Kambrook To pour hot water, place a cup below the centre for examination, replacement non-drip tap and push the tap down. For or repair.
Page 4
KAMBROOK warrants the purchaser accessory or product will be replaced. against defects in workmanship and material, In the event of KAMBROOK choosing to for a period of 12 months from the date of replace the appliance, the guarantee will purchase (3 months commercial use).
Need help?
Do you have a question about the 8 Litre Urn KUR10 and is the answer not in the manual?
Questions and answers
How to descale urn
To descale the Kambrook 8 Litre Urn KUR10, follow these steps:
1. Fill the urn until it is 2/3 full with a solution of 1 part vinegar and 2 parts water.
2. Boil the solution and allow it to stand overnight.
3. Empty the solution from the urn.
4. Fill the urn with clean water, bring it to a boil, and then discard the water to remove any remaining residue.
Alternatively, a commercial kettle descaler can be used, which is available from most supermarkets, department stores, and hardware stores.
This answer is automatically generated