Summary of Contents for Einstein The Turntable’s Choice
Page 1
Dear EINSTEIN customer, With your purchase of the EINSTEIN phono amplifier The Turntable’s Choice, you now own an audio component of the highest mechanical and electrical qualities. In order to fully appreciate the great bene- fits of this unit, we kindly ask you to carefully read these instructions and manual.
Page 2
Warranty cards 3. Technical information EINSTEIN’s The Turntable’s Choice is a moving coil (MC) phono amplifier, available as a balanced or sin- gle ended (RCA) model. Two separate outboard power supplies (one if single ended) provide the neces- sary power to the fully discrete (24 hand selected single-transistors) amplifier section. The high gain, high signal to noise ration design of this phono amplifier allows the use of very low output moving coil cartridges.
Page 3
6. Connecting your phono amplifier Prior to enjoying your new EINSTEIN component, please make sure that it is properly connected to your source and amplifier. You must connect a ground wire between the phono amplifier and your turntable.
Page 4
Make sure that the phono amplifier is not close by any other components with powerful trans- formers 12. Warranty Your EINSTEIN The Turntable’s Choice phono amplifier comes with a 3-year warranty if the following conditions are met: Return of the supplied warranty card and appropriate customer information stamped by your dealer...
Page 5
13. Technical specification EINSTEIN The Turntable’s Choice Amplification 70db (2500x) Signal to noise ratio 76db Distortion less than 0.03% RIAA equalization passiv Input impedance variable Output impedance 50 Ohm Output voltage Output voltage balanced Weight 3.5kg / balanced 7.0kg 14. Final testing prior to shipment...