3.4.
Formatting HDD
When HDD is exchanged, format HDD as the procedure below.
Without formatting, the error message appears on the LCD display when accessing HDD.
<Formatting procedure>
The Mode Switch to select
Select [HDD] and press the joystick.
Press the MENU button, then
select [SETUP] →
[FORMAT MEDIA] → [HDD] → [YES] and
press the joystick.
When the confirmation message
appears, select [YES], then press
the joystick.
• When formatting is complete, press the MENU
button to exit the message screen.
Note:
• During formatting, do not turn this unit off.
• When you format the HDD, use a battery with
sufficient battery power or the AC adaptor.
• During formatting, do not cause any vibrations
or impacts to this unit.
.
15