Installation
SV-INTERCOM-
SkyView Unit
2S
Pin
SV-COM-425 #1
14
SV-COM-425 #2
15
16
17
18
SV-D700 / SV-
19
SV-D700 / SV-
20
21
22
23
24
SV-COM-425 #1
25
Connect the DIM INPUT (Pin 5) to only one SkyView display
In a SkyView system with multiple displays, only one SkyView display's DIM
OUTPUT (D37, Pin 26) should be connected SV-INTERCOM-2S (Pin 5). Do not
connect the Pin 26 signals from multiple SkyView displays together. This
requirement may change in future versions of SkyView firmware.
2-6
SV-INTERCOM-2S
Pin
Radio 1 Headphones
Pin 10
Radio 2 Microphone
Pin 1
Copilot Push-To-Talk
N/A
Non-Muting Mono Aux
N/A
N/A
Music In Ground
Stereo Non-Muting
D1000(s)
(SkyView/EFIS) Audio
D37 Pin 13
Stereo Non-muting
D1000(s)
(SkyView/EFIS) Audio
D37 Pin 30
N/A
Copilot Headphones Right
N/A
Pilot Headphones Right
N/A
Pilot Microphone
N/A
Stereo Music In Left
Radio 1 Microphone
Pin 1
Figure 1 - SV-INTERCOM-2S Connections
SV-INTERCOM-2S Installation and User Guide - Revision A
Function
Input
Output
Switch
This audio signal does not mute
when audio signals are received
on other inputs. Use this input for
Input
Used exclusively for stereo audio
This audio signal does not mute,
audio from SkyView or other EFIS
Input Left
audio ground. Should not be used
Ground
Output
Notes
Connects to SV-COM-425 #1 /
Radio #1 Headphones Output
critical audio signals such as a
NAV radio or avionics alerts.
ground. Should not be used for
other ground connections.
and is typically used to receive
system with stereo output.
Used exclusively for stereo EFIS
for other ground connections.
This input is over-ridden by the
Music In jack on the SV-
INTERCOM-2S
Need help?
Do you have a question about the SV-INTERCOM-2S and is the answer not in the manual?