Safety Belts - BMW X5 3.0i Owner's Manual

Hide thumbs Also See for X5 3.0i:
Table of Contents

Advertisement

Safety belts

Put on the safety belt before each trip,
as the airbags supplement the safety
belts as an additional restraint device,
however do not replace them.
Locking
Make sure you hear the latch plate
engage in the belt buckle.
Lights up for a few seconds or
until driver's safety belt is fas-
tened. Depending on model,
together with an acoustic signal
*
message
in the Check Control.
Unlocking
1. Press the red button in the belt
buckle
2. Hold the belt firmly
3. Guide the belt back into its reel.
In the rear the center safety belt
buckle is intended exclusively for
the center passenger.
If it is not possible to extract the center
belt, this indicates that the larger back-
rest is not securely locked, refer to
page
124.<
*
or a
Online Edition for Part No. 01 41 0 158 286 - © 04/04 BMW AG
Safety belt height adjustment
You can adjust the safety belts to fit
your own physical dimensions by using
the safety belt height adjustment:
Slide the button up or down as
required.
Also observe the instructions on adjust-
ing the seats on page 43.
In the event of loads caused by
accidents or other damage: have
the belt system, including the belt ten-
sioners and any child restraint systems,
replaced by a BMW Sports Activity
Vehicle center and have the belt anchor
points
checked.c
49n

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

X5 4.4iX5 4.8is

Table of Contents