Do you have a question about the ES-150 and is the answer not in the manual?
Questions and answers
Preston Mcdaniel
April 30, 2025
My es150 power transformer was installed with a photocell. Can i disconnect the photo cell and use a separate timer? The photocell seems to not be working.
1 comments:
Mr. Anderson
May 16, 2025
Yes, the Vista ES-150 power transformer can be used with a separate timer instead of a photocell. The timer can be installed by inserting its plug into the timer receptacle on the transformer. The photocell and timer are interchangeable control options.
This answer is automatically generated
Robert Lifson
June 19, 2025
I can’t seem to get my unit to turn the lights on and off. I have no idea how to set. Help! I just got new timer. The lights and unit installer is no help.
Ray
February 13, 2025
How many LED outdoor lights can this transformer handle?
1 comments:
Mr. Anderson
February 13, 2025
The Vista ES-150 transformer is a 150-watt low-voltage transformer. To determine how many LED outdoor lights it can handle, divide the total wattage capacity (150W) by the wattage of each LED light. For example, if each LED light is 5 watts, the transformer can handle up to 30 lights (150W ÷ 5W = 30). The actual number may vary based on the wattage of the LED lights used.
This answer is automatically generated
Summary of Contents for Vista ES-150
Page 1
MULTI-TAP INSTALLATION TROUBLESHOOTING CHECKLIST Vista Professional Outdoor Lighting reserves the right to modify the design and/or construction of the transformer shown without further notification. 1625 Surveyor Avenue • Simi Valley, CA 93063 • (805) 527-0987 • (800) 766-VISTA (8478) FAX: (888) 670-VISTA (8478) • email@vistapro.com • www.vistapro.com...
Page 2
Adjustable Cable Raceway Feeder (ACRF) Removable Front Panel Vista Exclusive - Easiest in the industry to wire: adjustable cable The door can be removed for greater access to wiring raceway feeder easily accommodates multiple wire runs. Or use compartment during installation.
Page 3
Cable is measured by gauge. The lower the transformer. Locating the transformer REMOTE PHOTOCELL the number, the thicker the cable and in the center of the run reduces the effects CONTROL FUNCTIONS FOR the more current it carries. Cable for of voltage drop.
Page 4
ADJUSTABLE CABLE instructions. RACEWAY FEEDER (ACRF) Initial Operation: 1. Plug the timer into the Transformer 120- Vista Exclusive - Easiest in the industry to volt wire: adjustable cable raceway feeder accessory recepticle and turn the power easily accommodates multiple wire runs.
Need help?
Do you have a question about the ES-150 and is the answer not in the manual?
Questions and answers
My es150 power transformer was installed with a photocell. Can i disconnect the photo cell and use a separate timer? The photocell seems to not be working.
Yes, the Vista ES-150 power transformer can be used with a separate timer instead of a photocell. The timer can be installed by inserting its plug into the timer receptacle on the transformer. The photocell and timer are interchangeable control options.
This answer is automatically generated
I can’t seem to get my unit to turn the lights on and off. I have no idea how to set. Help! I just got new timer. The lights and unit installer is no help.
How many LED outdoor lights can this transformer handle?
The Vista ES-150 transformer is a 150-watt low-voltage transformer. To determine how many LED outdoor lights it can handle, divide the total wattage capacity (150W) by the wattage of each LED light. For example, if each LED light is 5 watts, the transformer can handle up to 30 lights (150W ÷ 5W = 30). The actual number may vary based on the wattage of the LED lights used.
This answer is automatically generated