Kambrook KDL120B Instructions

KDL120 Desk Lamp
PLEASE READ AND FOLLOW THE
INSTRUCTIONS PRIOR TO USING
YOUR DESK LAMP.
Arrange cord away from traffic areas
and where it will not be tripped over.
Ensure the "On/Off" switch is in the
"Off" position prior to plugging the
lamp into the 230-240 Volt mains
supply.
The desk lamp is not intended for
outdoor, wet or moist location. Do
not immerse or allow water to be
spilt on the desk lamp.
Avoid touching lamp shade while it is
on, some parts of the lamp may
become hot. When moving the lamp,
switch off, allow to cool down and
hold the lamp by the body when
carrying.
Keep combustible materials such as
drapes and other furnishings well
clear of the lampshade, as the
lampshade may become hot if the
lamp is left operating for a period of
time.
Extreme caution and supervision is
necessary when this lamp is used by
or near children, invalids or animals.
Young children should be supervised
to ensure they do not play with the
lamp.
KDL120
When not in use, pack the desk lamp
in its original box for best protection
and store in a cool, clean and dry
location
Always turn off and then unplug the
desk lamp before cleaning
Do not attempt to open or work on
the desk lamp at anytime, there are
no customer serviceable parts inside.
Please return the desk lamp to
Kambrook or an authorised service
agent for service or repairs.
Use this desk lamp only as described
in this instruction manual. Any other
use not recommended by the
manufacture may cause fire, electric
shock or injury and voids all
warranties.
Do not use the desk lamp on heat
sensitive surfaces as there may be a
build up of heat when left in the same
position over a period of time. Please
choose the desired surface carefully.

Specifications:

Electrical Rating
Input – 230-240 Volt AC, 50Hz
Output – 12 Volt, 20 Watt