Do you have a question about the Pure Link DCE Series and is the answer not in the manual?
Questions and answers
Summary of Contents for Dtrovision Pure Link DCE Series
Page 1
DCE Series DVI over CAT5 Extension System With Audio Owner’s Manual Dtrovision LLC 9A Bergen Turnpike Little Ferry, NJ 07643 Tel: +1.201.488.3232 Fax: +1.201.621.6118 Email: support@dtrovision.com www.dtrovision.com For order support, please contact your local dealer. For technical support, please contact us at...
Page 2
DCE Package Contents Please make sure all of the following items are included in the package; 1) DCE Transmitter Module 2) DCE Receiver Module 3) 6ft DVI-D Cable (x2) 4) DC 12V Power Supply Unit with a power cord 5) User Manual...
General Specification DCE is a DVI, surround digital audio and analog audio extension system over CAT5 cable for long distance up to 165ft. Its compact & durable design and low power consumption makes it an ideal solution for connection for high definition video and audio signal of digital displays such as LCD/Plasma monitor and Projector.
Main Features 1. Zero loss & Zero noise delivery of digital high definition video and audio signal using UTP connection, DCE delivers HD signals over CAT-5 cable without loss or digital interference maintaining the clarity and colors. Noise cancellation and error correction logic enhances video and audio signals over long distance.
Installation and Connection Instructions 1. Turn off both the video source and the display before connecting any cables. 2. Connect CAT5 cable between the DCE transmitter and the DCE receiver. 3. Connect DVI cable between the source and the DCE transmitter AND the DCE receiver and the display.
Page 7
Signal Status LCD Display The LCD panel on DCE transmitter and receiver shows the current signal status. Example Status; How to install CAT5 Cable DCE was designed to conform to TIA/EIA-568-B standard. Please ensure that each PIN layout of DCE transmitter and DCE receiver are corresponding with the picture below before connecting the cable.
DCE Transmitter and Receiver Specification Module Dimensions: 53.6x46.5x9.86 (inches) 136x118x25(mm) Transmitter Connection Ports: DVI IN: DVI Input Audio IN(R, L): Analog Stereo Audio input OPTICAL IN: Digital Audio input OPT/ANALOG Switch: Toggle between Stereo Audio and Digital Audio (Optical In) RJ-45(CAT) receptacle 12V DC Power Supply Unit Input LCD Panel Display;...
Data Transfer Speed: Up to 2.25 Gbps (Single Link) Frequency Range: 25 ~ 165 Mhz Supporting Display Resolutions: Up to WUXGA (1920X1200)@60Hz / 1080p I/O Signal Standard: Digital RGB, TMDS Max Distance: 50M (165ft) at 1920x1200@60Hz / 1080p UTP Cable specification: CAT-5/5E/6 Input Ports: DVI-D Female 29P / RJ-45 / RCA / Optical...
Page 10
authorized agents, causes other than from ordinary use or failure to properly use the Product in the application for which said Product is intended. FCC/CE Statement This device complies with part 15 of FCC Rules and EN 55022/55024/61000-3 for CE certification.
Need help?
Do you have a question about the Pure Link DCE Series and is the answer not in the manual?
Questions and answers