CONTENTS NOTES Important Information and Safety Precautions Parts and Accessories Control Panel Description Remote Control Guide Power Cord and Plug Information Installation Mounting Illustrations Timer/Sleep Setting Cooling Mode Dehumidifying, Fan Mode Water Drainage Maintenance and Long Term Storage Trouble Shooting Trouble Shooting and Error Codes Customer Service Energy Saving Tips...
ReaD all InsTRUcTIOns beFORe Use. b. at its option, Fridge electric will repair or replace this product if it is found to be defective in material or workmanship. While within the warranty period, defective product may be returned to Fridge electric.
TROUBLE SHOOTING Cont. always unplug the arcticPro when no one is in the room and before cleaning. Do not touch the metal parts inside. The remote • Use the remote control near the unit and make sure it is Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or the like. arrange cord away control is aimed at it.
TROUBLE SHOOTING PARTS ATTENTION: Before contacting Customer Service, please refer to the Front Back following guide. Control panel Handle WARNING: Immediately turn off the ArcticPro, pull out the plug and contact Customer Service Horizontal and if any of the following occurs: vertical vents Power cord and plug •...
mAINTENANCE CONTROL PANEL Cleaning ATTENTION: Turn off the unit and pull the plug out before any cleaning. Energy Tip! Dust in the air filter will reduce efficiency. Clean the filter every 2-4 weeks for better performance. Cleaning the surface ATTENTION: If the unit is turned off in cool or Dehumidify mode and restarted immediately, then the air Clean the surface of the unit with a duster or a damp soft cloth.
WATER DRAINAGE REmOTE CONTROL This product has a self-evaporative system. The condensing water will recycle to cool the condenser. This water-cooled mode not only can improve cooling efficiency and decrease noise, but also save energy. In Cool and Dehumidifying Modes, water from the evaporator flows into an inside Power To turn the unit on/off.
OPERATION Cont. LCDI POWER CORD AND PLUG This air conditioner is equipped with an lcDI (leakage current Detection and Interruption) power cord and plug. The Dehumidifying mode lcDI power cord and plug will shut off the supply source via electrical disconnect (circuit trip) if the nominal current leakage between the cord shield and either load conductor exceeds a predetermined value.
OPERATION Cont. INSTALLATION Energy Tips: • In Cool mode, when the Water Injection indicator lights up [ ], you may inject some water through the injection port before cooling begins (do not overfill) to add humidity to the air. ], the water must be drained periodically, •...
OPERATION mOUNTING ILLUSTRATIONS Wall mounting Timer/Sleep Setting Sleep setting To automatically turn the unit OFF after a chosen length of time: Press the Timer button when the unit is on. 51” The LED [ The LED [ The LED [ The LED [ The LED [ The LED [...
Need help?
Do you have a question about the ArticPro and is the answer not in the manual?
Questions and answers
Do I need to add water or plug it in and go?