Installing The Wls-Ifc; What Comes With Your Wls-Ifc Shipment; Hardware; Additional Documentation - Measurement Computing WLS-IFC User Manual

Installing the WLS-IFC

What comes with your WLS-IFC shipment?

The following items are shipped with the WLS-IFC.

Hardware


WLS-IFC

USB cable (2 meter length)

Additional documentation

In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf). This booklet supplies a brief description of
the software you received with your WLS-IFC and information regarding installation of that software. Please
read this booklet completely before installing any software or hardware.

Unpacking the WLS-IFC

As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the WLS-IFC from its packaging, ground yourself using a wrist strap or by simply
touching the computer chassis or other grounded object to eliminate any stored static charge.
If your WLS-IFC is damaged, notify Measurement Computing Corporation immediately by phone, fax, or
e-mail. For international customers, contact your local distributor where you purchased the WLS-IFC.

Phone: 508-946-5100 and follow the instructions for reaching Tech Support.

Fax: 508-946-9500 to the attention of Tech Support

Email: techsupport@mccdaq.com
8
Chapter 2