Deleting The Recorded File - SanDisk Sansa m200 Series User Manual

6. To change the volume of your music as it plays, push the Volume Button on the
right side of your player.
7. To stop playing a recorded file, you have three choices:
Press and hold down the Power/Menu Button until all the dark squares
disappear under the "Powering Down" message.
Navigate to another recorded file with the Previous/Fast Reverse or Next/Fast
Forward Buttons. When you stop, the recorded file displayed onscreen will play.
Press the Power/Menu Button briefly to access the software Menu then press
the Select Button to switch to Play Music to select another audio file to play.
To learn how onscreen menus work, see the Navigating the Software Menus
chapter that begins on Page 20.

Deleting the recorded file

During the playback of a recorded file, you can delete the recorded file from your Sansa
Player. Follow these steps:
1. Press the Power/Menu Button briefly once. The SanDisk logo and Sansa logo will
briefly appear onscreen then disappear. (Can't find the Power/Menu Button on
your player? See The Basic Controls section on page 3.)
WARNING: If the onscreen message says "Locked" and then shuts off, you
need to locate the Hold Button on the left side of your player. Slide that button
up to unlock your device. Then repeat Step 1 above. See The Basic Controls
section on Page 3 if you cannot find the Hold Button.
NOTE: If you do not see music files onscreen, briefly press the Power/Menu
Button on the right side of your player. The software Menu will appear. Press the
Repeat/AB/Down Button to scroll and highlight Modes. Press the Select Button
to select Modes. Press the Play/Pause/Up Button to scroll then highlight the
Audio Playback mode. Press the Select Button to enter music mode.
2. Press the Power/Menu Button once to access the software Menu. Press the
Repeat/AB/Down Button or Play/Pause/Up Button to scroll and highlight Play
Music. Press the Select Button to enter Play Music mode.
3. Press the Repeat/AB/Down Button or Play/Pause/Up Button to scroll then
highlight Recordings. Press the Select Button. The recorded files will be displayed
onscreen.
4. Press the Repeat/AB/Down Button to scroll through the recorded files. Highlight a
recorded file, and press the Select Button to play the selected file.
Voice Recording 18