Page 1
PRODUCTION RELEASE & REVISION DESCRIPT’N/BUYER DWG No PATRS No. DATE INITIAL ----------------- 50302977 H.I.AHN D.G.KIM 09-19-12 INITIAL ----------------- 50302977 H.I.AHN D.G.KIM 10-18-12 REV B : 앞,뒤표지 수정, 재고 없음, 즉시적용 NOTES 1. MODEL : HSG-G1222 외/ NOBRAND 2. MATERIAL : 모조지 100g/㎡, WHITE 3.
Page 2
INSTALLATION / OPERATION USER’S MANUAL Full HD-SDI CAMERA Please read this manual thoroughly before use, and keep it handy for future reference.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION CAUTION RISK OF ELECTRNIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
FCC COMPLIANCE STATEMENT FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
TABLE OF CONTENTS CONTENTS OF PACKAGE -------------------------------------------------------------3 INTRODUCTION----------------------------------------------------------------------------6 CAMERA OVERVIEW ---------------------------------------------------------------------7 CAMERA INSTALLATION ----------------------------------------------------------------8 OSD Menu Setup ------------------------------------------------------------------10 CAMERA OPERATION --------------------------------------------------------------11 CONNECTIONS / DAY&NIGHT IN & ALARM OUT TERMINALS -------------14 SPECIFICATIONS ---------------------------------------------------------------------------------- 16 CONTENTS OF PACKAGE Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes.
INTRODUCTION Full HD 2Mega pixel Camera HD-SDI 1080@30fps HD-SDI & Composite Video OUT. Features: Full HD (1920x1080p) Real Time High definition, 1080p video over 100m of RG59 or equivalent cable Advanced Technology for Surveillance - WDR( Wide Dynamic Range ) / BLC - 3D-Digital Noise Reduction - Digital Image Stabilization - Digital Slow Shutter...
CAMERA OVERVIEW TOP VIEW Lens: Allows wide area to be monitored BNC Cable: HD-SDI OUT & Extension cable Connection Cable ① BNC Connector : HD-SDI Output ② Main POWER connection - RED : DC12V or AC24V - Black : GND or AC24V ③...
INSTALLATION ------------------------------------------------------------------------------------------------------------------------- Before Installation Before installing the camera, thoroughly familiarize yourself with the information in this section of the manual. - Recommends connecting the camera to a network that use a DHCP (Dynamic Host Configuration Protocol) server to address devices. - To ensure secure access to the IP camera, place the camera behind a firewall when it is connected to a network.
Page 10
NOTES Cable through the electrical box with the dome base The housing can also be mounted on a 4s or 2s electrical box. Using the conduit knockout punched with the dome base Remove the conduit knockout punched for the cable entry. Figure 3.
CAMERA INSTALLATION Connection Overview Starting Installation 1. Install the Lens Field of view: Adjust setting from Telephoto (T) to wide (W) field of View. Focus: Adjust lens focus from near (N) to infinity. - Be careful the lens does not touch camera sensor when installer try to enter the lens into camera. 2.
OSD Menu Setup The following table shows the list of menu items and options. You can adapt the camera to your requirements by setting up the respective items in these menus Main Menu Sub Menu Contents WDR/BLC OFF/WDR/BLC/ HSBLC BRIGHTNESS 0 to 100 OFF/LOW/MIDDLE/ HIGH X64, ..., x2, AUTO, OFF, A.FLK,...
Page 13
HEIGHT 4 to 100 WIDTH 4 to 100 MOVE Y 2 to 98 MOVE X 2 to 98 MASK NUMBER AREA1 to AREA2 CIR. DISPLAY ON/OFF HEIGHT 1 to 15 CIRCLE WIDTH 1 to 15 MOVE Y 0 to 100 MOVE X 0 to 100 RADIUS SIZE...
CAMERA OPERATION Main Menu Click Button on the OSD control Window. The camera setting menu appears on the view picture CAMERA SETTING ▶ CAMERA ID EXPOSURE WHITE BAL DAY/NIGHT AUTO MOTION DET 3D-DNR HIGH PRIVACY SPECIAL ◄ RESET ◄ EXIT ◄ Use up or down button to select an option the push button.
Page 15
NOTES - If you set [Shutter speed] to Auto, then the [WDR] and [SENS-UP] are available. - If you set [Shutter speed] to AntiFlk, then the [WDR] is available. - In Shutter speed mode, the [WDR] and [SENS-UP] are not available, except that the mode is Auto or AntiFlk. - Sens-Up: If pictures are not clear due to darkness, this SENS-UP operation would increase the sensitivity of picture.
Page 16
< PRIVACY setting> Use the Privacy Mask tab for aiming at the protection of personal privacy. Mode: Select an ON mode for Privacy Mask function. -- Off: Not in use. -- On: Set and Use the P-Mask function. 1. Select an ON mode and click the Save button. Then P-Mask OSD windows will be appears. 2.
Page 17
USER TITLE A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z - .
CONNECTIONS/DAY&NIGHT IN & ALARM OUT TERMINALS TTL level ALARM OUT Motion detection signals are output through this port. Active state is configurable. ALARM OUT Normal : 0V ALARM OUT ALARM OUT Active : 5V Period : Alarm out period (5sec) DAY&NIGHT IN Terminals To select Day/Night mode using external equipment, by connecting control lines to the appropriate terminals.