Qianjin Electronic SP 02 User Manual page 32

SQ Remote Power Management User's Manual
• Fallback to static IP (if DHCP failed):
Define a static IP address. If DHCP is disabled on the system, there is no DHCP server
running on a network, or a DHCP server refuses IP offering, you have the option to whether
either allow the system to use a static IP address or not.
• Static IP Address:
A static IP Address is an IP address that never changes. This IP address will be used if a
DHCP server IP has no IP offered or DHCP automatic IP address is disabled.
• Subnet Mask:
Defines a static subnet mask that is a part of your static network address settings. This entry
is for your IP network class, which is distinguished by using a subnet mask.
• Gateway IP address:
Specifies a gateway IP address that is a part of your static network address settings. This is
your router's IP address.
• Set DNS Server IP manually:
Specifies a DNS Server IP manually.
• Primary DNS IP:
Specifies a priamary DNS IP address.
• Secondary DNS IP:
Specifies a secondary DNS IP address.
• HTTP Port Number:
Specifies a HTTP port number. Default value is 80.
• Telnet Port Number:
Specifies a Telnet port number. Default value is 23.
• POP3 Port Number:
Specifies a POP3 port number. Default value is 110.
• SMTP Port Number:
Specifies a SMTP port number. Default value is 25.
• Incoming Email POP3 Server:
Specifies POP (incoming Email) server address. The system supports POP3 Internet Email
Protocols, not web based Email services. "61.129.42.78" and "pop.sina.com" are examples
of POP Email servers. Make sure that the POP server you use does not require log on
secure password authentication.
Helpful Info:
use the command "getmail" to immediately check incoming emails.
____________________________________________________________
32
Addr：A/4F, 2# Building , No.401, Caobao Road , Shanghai ,China Zip：200233 Web：www.sq-catv.com
Fax： 86-21-64858301 - 62401979 Tel： 86-21-54973555 – 34140103 - 64957666 E-mail： sqjeecl@online.sh.cn