Page 1
MultiView II Transmitter Installation and User Guide Document # 5310188-02 Rev-01 (3/22/2012)
Page 2
In no event will Magenta Research be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of or inability to use the hardware, software or documentation.
Page 3
Precautions Precautions Safety Instructions ● English This symbol calls attention to important information. This symbol is intended to alert the user of important maintenance (servicing) and operating information. This symbol is intended to alert the user to the presence of un-insulated dangerous voltages or other conditions in or around the product enclosure which may present a risk of electric shock, damage to equipment or facilities.
Contact Information Contact Information For sales or technical support, contact your nearest Magenta Research sales office. Region Contact details North, Central and South Main: 800-805-0944 (USA only) or +1 860-210-0546 Americas: Fax: 1-860-210-1758 Magenta Research, Ltd. Web: www.magenta-research.com Corporate Headquarters Sales: sales@magenta-research.com...
Table of Contents Table of Contents Page Chapter 1 About this Manual ........................1 Chapter 2 Product Overview ........................2 Front Panel interfaces ..................... 2 Rear Panel interfaces ..................... 2 Chapter 3 Specifications ..........................3 General Specifications ....................3 DDC/EDID Support ......................4 Auxiliary Signal Support ....................
About this Manual Chapter 1 About this Manual This manual contains information about the Magenta MultiView™ II T4 transmitter (hereafter referred to simply as “T4”). This includes: • Product overview (Chapter 2). • Product specifications (Chapter 3). • Installation and configuration instructions (Chapter 4) •...
Chapter 2 Product Overview The Magenta MultiView™ II T4 transmitter extends an analog video signal over standard CAT5 cable (also CAT5e and CAT6). It accepts analog video (VGA, RGB and other analog formats), audio (analog or S/PDIF) or serial (RS-232 simplex) signals. These are converted to MultiView™-compatible signals, provided over 4 UTP output ports.
Specifications Chapter 3 Specifications General Specifications Item Description Cable Required Category 5, 5e, 6 cable. Shielded or unshielded twisted pair. Low-skew. Compliance CE, FCC Class A, IC Class / Class A, UL listed I.T.E Device, RoHS. Video Support RGBHV, RGB, Composite, S-Video, and Component Video modes. Resolution &...
Specifications DDC/EDID Support For best compatibility with source devices (ex: a PC), an extension device (T4 in this case) should provide an appropriate DDC/EDID profile with the proper resolution and timing information. This helps ensure best compatibility with display devices connected at the remote end. The T4 supports a simple yet very flexible DDC/EDID management scheme: •...
This allows one video source to be sent to many displays at the same time – with the absolute minimum amount of signal degradation possible. Magenta Research products are compatible with standard CAT5/5e/6 data cabling as well as specialized “low skew” cabling manufactured primarily for video applications. Note that some “low skew” cabling is specific to a particular equipment vendor or application and may not compatible with MultiView™...
Installation Chapter 4 Installation CAT5/5e/6 cabling for the Magenta MultiView™ II Series must be pinned to the TIA-EIA T568B wiring specification. Figure 1 T568B CAT5 Specification We also highly recommend that all CAT5 cables be pre-terminated and tested. Cables terminated on-site or in an existing infrastructure should be tested before use to ensure compliance with the TIA-EIA T568B specification.
At the T4 transmitter end: Connect the source video to the Magenta MultiView™ II Series transmitter video input port, which is a standard HD15-female (VGA) connector labeled SOURCE IN. If desired, attach a local monitor to the VGA connector labeled LOCAL OUT (optional).
Page 13
Installation At the receiver end (these steps are generic - refer to the appropriate receiver manual): Connect the VIDEO OUTPUT connector to the display, and attach any audio (AUX I/O) and/or serial connections depending on the model of MultiView™ receiver and option module installed.
• STD: Selects the Magenta Magic DDC profile. Press the DDC MODE button until the STD indicator (LED 6) is on. The Magenta Magic profile is a default set of common video resolutions. This is the factory default setting. •...
Installation 4.3.4 Config Mode-1: Sync-mode Options The T4 is factory-configured for auto-detecting the proper sync-mode (RepliSync-I normal/stretched). This mode is generally compatible with all existing MultiView™ receiver products that support RepliSync (if they are also using their factory-default settings). However, some video sources may require a custom sync-mode setting (most especially at 1080p and 1920x1200 video resolutions).
Installation 4.3.6 Config Mode-2: Video Coupling Select AC or DC coupling, and DC-restore functions, to be applied to the input video. (starting in normal-mode) Press and release the CFG Front Panel View Video Options Mode LED1 LED2 button twice to access configuration-mode-2. CFG indicator = flashing.
“S” type) capable receivers with video switches, correctly distribution amps, or multi-output transmitters, the serial data is sent transmit-only. Please take this into account when trying to control displays or other devices. For assistance, contact Magenta Technical Support. MultiView™ II T4 Installation and User Guide...
Page 18
Troubleshooting Problem Solution When utilizing a receiver’s RJ45 daisy chain port, the following rules apply: • If using L/R summed audio, simplex serial, or SPDIF units, a maximum of 12 units may be daisy changed within the rated cable length of the receiver. •...
Connector Pinouts Appendix A Connector Pinouts HD15 connector pinout (SOURCE IN, LOCAL-OUT) Pin #5 Pin #1 Pin #10 Pin #6 Pin #15 Pin #11 MultiView HD15 video connector signal assignments: Composite RGBHV Com- SVHS Video & RGBS RGsB (VGA) posite (Y/C) Stereo Audio...
Page 20
Connector Pinouts Auxiliary I/O (AUX-IN/AUX-OUT) Pin #1 Pin #4 4-pin Phoenix connector signal assignments: Composite Video SPDIF PIN# Simplex (use S/PDIF Audio Audio Serial configuration settings) Left Channel Signal + Signal + (SIG1) Ground ground Signal - Signal - (GND) Right (SIG2) Channel...
Page 21
Connector Pinouts RJ45 (MultiView link) Wiring Standard PIN # COLOR PAIR White / Orange Stripe Pins on plug Orange Solid face (socket is reversed) White / Green Stripe Blue Solid White / Blue Stripe Green Solid Typical RJ-45 plug White / Brown Stripe Brown Solid MultiView™...
Page 22
Connector Pinouts DC Power Connector Magenta provides ready-to-use power supplies for MultiView™ II products. However, if there is a reason a substitute power supply must be used, then the following information is important for maintaining product reliability and performance: Magenta AC/DC Power supply output rating: Regulated +5VDC @ 3Amps.
Mounting Kits Appendix B Mounting Kits There are several kits available for mounting the T4 Transmitter: Mounting Kit # Description 8310203-02 1U Rack-mount Plate for standard 19” rack. Mounts 3 devices in a 1U space. Comes with (6) device-mounting screws, (4) rack-mounting screws. 8310204-02 2U Rack-mount Plate for standard 19”...
System Design Drawings Appendix C System Design Drawings The following drawings are available from Magenta Research as an aid in system design and configuration. You may download them from the Magenta website (www.magenta-research.com). There is no charge for obtaining these drawings.
Magenta Research (New Milford CT USA) declares under our sole responsibility that the Magenta MultiView video-extension products to which this declaration relates is in conformity with the following standard(s) or other normative documents: •...
Spares & Options Appendix E Spares & Options These spares and optional cables are available from Magenta Research. Magenta P/N Description Power Supplies: 8020069-03 U.S. Domestic Power Supply for Transmitter or Receiver, 5V DC (Vertical Mount). 8020077-03 Universal Power Supply w/ US Power Cord, for Transmitter or Receiver, 5V DC (Desk...