Advertisement
Digital PEN User Guide
Cleaning the NOTETAKER
? ? C lean your NOTETAKER base unit using a soft cloth.
? ? Special care must be taken not to insert sharp pointed objects into the ultrasonic and
transmitting receiving units.
Setting Up Your Desktop Software
Your product is packaged with a CD that includes its companion desktop software
Installing the Software
After the installation process, when running the application for the 1st time, a new folder named " My
Notes," is created in your " My Documents" directory. All your notes will be saved into this directory. In the
event that no " My Documents" directory is found, the installation process will create a new " My
Documents" folder on your C hard drive. The ' My Notes' folder will be created under this directory. If you
uninstall, upgrade or reinstall
the software in a different location, the note files will remain in this directory, and will not be overwritten
To install NOTETAKER software
1. Insert the installation CD into your CD ROM drive. The setup program should start automatically. If not,
run the program by selecting ' Run' from the Windows ' Start' menu and type in D:\setup.exe. If your CD
drive uses a different letter, type that letter instead of D.
2. Follow the instructions on the screen. During installation, you will be prompted to choose whether you
would like the application to auto-start when windows loads, and whether you would like an application
icon on your desktop (in Custom Installation).
Port Auto-Detection
Once you launch the application, the NOTETAKER software automatically detects your hardware. The
application automatically searches all ports in order to detect the Hardware. If it is unable to locate the
connection, the Hardware Detection dialog box appears.
USB Hot-Insertion
USB Hot Insertion refers to connecting the USB cable while the application is running. The application will
auto-detect your hardware if the USB cable is disconnected while the system is running and then re-
connected. The application will also auto-detect the hardware if you first run the software and then
connect the USB cable.
Procedure by HCL Infosystems Limited-Product Engineering Group
Page 4 of 31
Advertisement
