Table of Contents
Advertisement
Available languages
Available languages
Remove the fan from packaging and retain for future storage of the unit.
1. Front Grille
2. Blades
3. Slider Control (at back of fan)
4. Rear Grille (at back of fan)
5. Base
Plug fan into a 120V/60Hz outlet and follow the operating instructions:
This fan has a 3 position slider control located at the back of the fan:
0
The slider in this position indicates the fan is powered OFF
1
The slider in this position indicates the fan is powered ON, operating at a low speed setting.
2
The slider in this position indicates the fan is powered ON, operating at a high speed setting.
CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
1. Always disconnect the cord from the electrical outlet when cleaning your fan.
2. Light accumulated dust may be removed by using a soft cloth to wipe away the dust at the back grille of the fan.
3. Wipe the exterior surfaces of the fan occasionally with a damp cloth (not dripping wet) and dry thoroughly with a soft
dry cloth before operating the fan.
4. Do not use harsh cleaners or materials to clean this unit, doing so will cause damages to it.
5. Do not attempt to open/disassemble.
CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE FAN AS THIS COULD CREATE A FIRE
OR ELECTRIC SHOCK HAZARD. THE FAN MOTOR IS FACTORY LUBRICATED FOR LIFE AND WILL REQUIRE NO
FURTHER LUBRICATION. NO OTHER USER MAINTENANCE IS REQUIRED OR RECOMMENDED. IF SERVICE IS
REQUIRED, SEND YOUR FAN TO THE NEAREST SUPER ELECTRIC AUTHORIZED SERVICE DEPOT.
Homestyles
9DAFBHS/9DAFWHS
VerS08
PARTS OF THE FAN
OPERATING INSTRUCTIONS
SPECIFICATIONS
MODEL
VOLTAGE
WATTAGE (W)
CLEANING & MAINTENANCE
9DAFBHS (BLACK)
9DAFWHS (WHITE)
120V AC, 60Hz
22W
4
Advertisement
Table of Contents
