Your Caspian DSP is at the heart of you’re A/V system. Its correct installation, set-up and operation will have a profound influence on the sonic performance of the entire A/V system installation.
AC MAINS SUPPLY Your Caspian DSP is set to operate from a fixed supply voltage which is marked on a label next to the mains input plug. Before connecting the mains lead please check that your mains supply corresponds to this label as...
Page 4
I N S T A L L A T I O N C a s p i a n D S P ROKSAN Caspian DSP Surround Sound Processor - Front Panel View COAXIAL 1 STEREO 44.1 KHZ VOLUME –23 dB...
Analogue inputs 3 & 4 which are stereo, can also be connected to analogue sources with Pro Logic output Surround Sound coded signal (for example a video cassette recorder). During playback of a video with Pro Logic Surround Sound the Caspian DSP will automatically switch to Pro Logic decoding and output in Pro Logic Surround Sound mode.
Page 7
Frequency Effects when listening in 5.1 Channel surround sound. If you are not using a subwoofer, your Caspian DSP can be set to ‘compensate’ for this by mixing and routing the low frequency signals to the Main L & R speakers.
Page 8
Your Caspian DSP is a high performance Digital Sound Processor that is used for Surround Sound, Analogue and Digital Input / Output control and Speaker settings. Before operating your Caspian DSP using front panel or remote handset controls, you must configure the system speaker settings. This is outlined and carried out as...
D S P Please refer to the front panel view on page 4. After connection to the Mains supply, switch the Caspian DSP on at the rear panel. It will enter STANDBY and the STANDBY LIGHT (7) glows red. Front Panel and Remote Handset Controls Operation You can control operations of your Caspian DSP from either its front panel or the Remote Handset.
Page 10
• Standby / On: Switch On your Caspian DSP from either the Remote Handset (16) or the front panel (1) and the Main FL Display will light indicating Dolby Surround Sound for a few seconds and then revert to the last volume setting and selected input.
Page 11
For Pro Logic, surround delay can be adjusted from 15 to 30 milliseconds in 5 millisecond increments. Roksan Audio ltd Caspian DSP A/V Surround Sound Processor User Manual CLASSIFICATION: General Use Version 2.01...
Page 12
1 ft => 1 mS Surround Left Surround Right CENTRE / SURROUND CHANNEL DELAY SETTING Roksan Audio ltd Caspian DSP A/V Surround Sound Processor User Manual CLASSIFICATION: General Use Version 2.01 Page 12 of 14 ENGLISH All specifications are liable to change without notice. E&OE...
C a s p i a n D S P There are no user-serviceable parts inside your Caspian DSP. If a fault should develop, refer any servicing to your appointed ROKSAN retailer, distributor or approved service agent. Your ROKSAN Caspian DSP is guaranteed against any defect in materials and workmanship for a period of two years from the date of purchase.
Page 14
Aditional US and forign patents pending. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. All rights reserved. Roksan Audio ltd Caspian DSP A/V Surround Sound Processor User Manual CLASSIFICATION: General Use Version 2.01 Page 14 of 14 ENGLISH All specifications are liable to change without notice.