Manually Configure The Usb Settings (Optional) - Ioline SmarTrac I/S Series User Manual

20 Ioline SmarTrac User Guide
i
Note
Manually changing the Windows
COM port settings is required
for some programs. Use the
Windows Device Manager to
®
change settings.

Manually configure the USB settings (optional)

®
1. Open the Windows Control Panel.
2. Double click on the System icon.
3. In Windows
the Hardware tab then the Device Manager button.
4. Double click on the Ports (COM and LPT) item to expand the
list.
5. Right click on the USB Serial Port (COMx) item in the list, then
choose Properties.
6. Click on the Port Settings tab and enter the values shown
above in Figure 11.
7. Click on OK when finished.
Figure 11. Setup the software for USB.
2000 and XP, open the System window, click on
®
Figure 12. Enter the port settings under the De-
vice Manager window.