Hypertech HyperPAC User Manual page 28

View Changes & Program New Settings
New Performance Selections are Highlighted
Engine Power Tuning
RPM Rev Limiter
1 - 2 Shift
2 - 3 Shift
3 - 4 Shift
Shift Firmness
Top Speed Limiter
Current Tire Size
Current Gear Ratio
MAIN
BACK
MENU
If all of the changes are correct touch START PROGRAMMING to begin the
programming process. The HyperPAC™ will lead you through some simple instructions
screens requiring you to cycle the ignition on and off, simply follow the instructions on
the screen. These Instruction screens may vary depending upon Year, Make, & Model
and are not shown in this manual.
If you wish to make more changes before programming the vehicle, touch MAKE
CHANGES.
NOTE: The programming process takes approximately 5 minutes.
The vehicle's engine cannot be running during the programming process.
Never leave the vehicle unattended during the programming process.
www.hypertech.com
HyperPAC™ User Manual
= Hypertech Regular
= +200 RPM
= +10 MPH
= +12 MPH
= Stock
= Level 3
= H-Rated 128 MPH
= P225/50/16
= Stock
MAKE
HELP
CHANGES PROGRAMMING
• (901) 382-8888
IMPORTANT:
-DO NOT leave the vehicle while
programming is in process.
-Make sure the vehicle battery is
FULLY
charged BEFORE programming.
-DO NOT operate electrical
accessories (radio,
windows, wipers, etc.) while
programming.
-DO NOT attempt programming
while the vehicle is connected to a
START
battery charger.
Page 28 of 66