Honda 2003 Accord Owner's Manual page 294

Main Menu
WASHER OIL DRAIN BOLT
4-cylinder models
2. Open the hood and remove the
engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container.
Table of Contents
OIL DRAIN BOLT
6-cylinder models
3. Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your
Honda dealer) is required to
remove the filter.
WASHER
OIL FILTER
4-cylinder models
4. Install a new oil filter according to
instructions that come with it.
Make sure to clean off any dirt
and dust on the connecting
surface of a new oil filter.
Engine Oil
CONTINUED
297
Maintenance