Summary of Contents for Digimat Techonology GP1260
-
Page 1: User Guide
GP1260 IAX2 Phone User Guide Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 1 -... -
Page 2: Table Of Contents
Call from PHONE BOOK ..............27 6.1.6. Speed dial................... 28 6.2. Answering calls ..................... 28 6.2.1. Answering a call ................. 28 6.2.2. Call Hold ..................... 28 Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 2 -... - Page 3 Locate upgrade file ................35 7.1.3. Start upgrade ..................35 LOAD AND STORE FACTORY SETTINGS............36 8.1 Load Defaults Settings ................... 36 8.2 Store Defaults Settings ..................36 Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 3 -...
-
Page 4: Product Overview
Using IP phone, you will save tremendously on international calls and long distance calls. GP1260 IAX2 IP phones provide an affordable IP phone system with ease of use, superior voice quality, economic physical design, advanced services, and features. -
Page 5: Software Features
● Tone generation and DTMF generation ● Call Hold with Music On Hold Support ● Call Waiting ● Call Transfer (Blind) ● Call Forwarding – Unconditional, No Answer, On Busy Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 5 -... -
Page 6: Standard And Protocol
● ICMP: Internet Control Message Protocol ● DHCP：Dynamic Host Configuration Protocol ● DNS：Domain Name Server ● TFTP：Trivial File Transfer Protocol ● HTTP：Hyper Text Transfer Protocol Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 6 -... -
Page 7: Electric Requirements
Check this following list before installation to make sure that you have received all items. If any item is not included in the package, please contact the distributor. 1) One GP1260 IAX2 Main Case 2) One Handset Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 7 -... -
Page 8: Connecting The Phone
Then plug the other end of the power cord adapter into the appropriate wall outlet. 4. GP1260 APPEARANCE 4.1. GP1260 IAX2 Phone Illustration ● GP1260 IAX2 Phone Front Illustration (Refer to Fig 4.1.1)： Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 8 -... -
Page 9: Function Keys
● GP1260 IAX2 Phone Back Illustrations(Refer to Fig 4.1.2 ) Network connect 1 Network connect 2 Power Jack Fig 4.1.2 GP1260 IAX2 Phone Back 4.2. Function Keys Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 9 -... -
Page 10: Led Functions
Flashing: Data transmitting and NETWORK1 NETWORK2 transmitting and receiving. receiving. Off: Network cable is Off: Network cable is disconnected or network error. disconnected or network error. Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 10 -... -
Page 11: Configuration Guide
The screen will display “Phone Book”. Please refer to Fig 5.1.1. Fig 5.1.1 Main Menu and Phone Settings Menu Structure Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 11 -... - Page 12 2. Press OK key. The phone will save the modified contents and reboot. Or press CANCEL key, the phone will abandon all modifications and stay in menu mode. Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 12 -...
-
Page 13: Viewing System Info
Press OK key to enter Phone Settings submenu. 5.1.3. Network Settings Fig 5.1.2 Network submenu Please check the Web Configuration 5.2.2 for details about these items. Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 13 -... -
Page 14: Voice Settings
5.1.4. Voice Settings Fig 5.1.3 Voice submenu Please check the Web Configuration 5.2.3 for details about these items. 5.1.5. Protocol Settings Fig 5.1.4 Protocol submenu Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 14 -... -
Page 15: Dialplan Settings
Please check the Web Configuration page 5.2.5 for details about these items. 5.1.7. System Settings Fig 5.1.6 System submenu Please check the Web Configuration 5.2.5 for detail about these items. Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 15 -... -
Page 16: Configuration With Web Browser
(default IP: 192.168.1.200). Then put password of the phone into the following page. Default password is empty. Fig 5.2.1 http settings NOTE: Make sure that the phone is in idle mode when viewing or setting GP1260 IAX2 Phone with web browser. 5.2.1. Network Settings The first several lines of this page give some basic information about this phone, including Phone Model, MAC address, OEM tag and Version No.. - Page 17 Set the IP address of the default gateway when Connection Type Default Gateway is set to Static IP. Set the User ID of the PPPoE when Connection Type is set to PPPoE User ID PPPoE. Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 17 -...
-
Page 18: Voice Settings
When Layer2 Qos is adopted, fill in VLAN tags (802.1Q) and Layer 2 Qos priority value of Ethernet frame respectively. (802.1P) 5.2.2. Voice Settings Fig 5.2.3 Voice Settings Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 18 -... -
Page 19: Protocol Settings
8 kbps, 11 kbps, 15 kbps, 18.2 kbps and 24.6 kbps. Voice Activity Enable/disable VAD. Detection(VAD) Automatic Gain Enable/disable AGC. Control(AGC) Acoustic Echo Enable/disable AEC. Cancellation (AEC) 5.2.3. Protocol Settings Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 19 -... - Page 20 10, maximum value is 65535. Default is 60, with the unit of second. Message service Fill in the voice message service number. number Use service’s dialplan Enable/disable service’s dialplan. Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 20 -...
-
Page 21: Dialplan Settings
Auto Answer Enable/disable auto answer. If set to yes, incoming calls will be answered automatically if user doesn’t answer in a certain period Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 21 -... -
Page 22: System Settings
Use digit maps is enabled. The minimum value is 3 and the maximum value is 60, with the unit of second. Use “#” To Call Enable/disable “#” to equate “CALL” key 5.2.6. System Settings Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 22 -... - Page 23 Set the output volume of the speaker, ranging from 0-31. Ring volume Set the ring volume of the speaker, ranging from 10-31. Auto-provisioning Server Fill in the URI or IP address for the auto-provisioning Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 23 -...
-
Page 24: Phone Book
Fig 5.2.7 Phone Book The first 10 entries (001-010) in PHONE BOOK are mapped to speed dial keys (M1-M10). Press M1-M10 will immediately call these numbers. Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 24 -... -
Page 25: Digit Maps
T represents the time to wait after the user dialed the last digit and its value is defined in Digit Maps Timeout option. The minimum value is 3; maximum value is 60, with the unit of second. Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 25 -... -
Page 26: Using Gp1260 Iax2 Phone
On-hook Speaker-phone Mode With GP1260 on-hook, it can switch to the off-hook mode by picking up the handset. Press SPEAKER key and put down handset, the phone switches to the speaker-phone mode. With GP1260 on-hook, press SPEAKER key to enter the speaker-phone mode. -
Page 27: Redial
Scroll to “Phone book” and press OK key to enter. 2. Scroll to the desired contact and press OK key to select the action to be taken next. Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 27 -... -
Page 28: Speed Dial
SPEARKER key again, the current call will release call hold. 6.2.3. Call Waiting When Call waiting option is enabled, if there is a new incoming call during the Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 28 -... -
Page 29: Switch Between Two Calls
CALL key to complete a blind transfer. 6.4. Call Forward 6.4.1 Forward Unconditionally When Forward Unconditionally is set to yes, all incoming calls will be Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 29 -... -
Page 30: Forward When Busy
Press MUTE key again to resume the conversation, the mute LED will turn off. 6.7. Do Not Disturb (DND) Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 30 -... -
Page 31: Checking Voice Message
1). Press OK key and scroll to “Add to Phonebook” item. 2). Press OK key to confirm. 3). Press CANCEL key twice. “Save Phonebook?” will show up. 4). Press OK to save the phone book. Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 31 -... -
Page 32: Edit Phone Book
3. When “Enter name” shows on LCD, enter the name through the keypad. Press OK key to confirm. Then “Enter Number” will show up on display. Enter the number through the Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 32 -... -
Page 33: Modify A Contact
Then “Enter number” item will be displayed on LCD, enter the phone number through keypad. Press OK key to confirm. 4. Repeat step 2 and 3 to modify more contacts. E.g. Edit Aimee (82378008) to Kingon (100083) Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 33 -... -
Page 34: Delete A Contact Entry
2. Press OK key to select the action to be taken next. 3. Scroll to “Delete All?” item and press OK key to confirm. E.g. 7. FIRMWARE UPGRADE 7.1 Manually upgrade Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 34 -... -
Page 35: Select Upgrade Item
Use “ browse……” button to select the upgrade file. As to how to get these files, please refer to AR1688 Develop Manual. 7.1.3. Start upgrade Click “Start Upgrade” button to start the upgrade. Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 35 -... -
Page 36: Load And Store Factory Settings
2. Scroll to “Load Defaults” and press OK key. Will be displayed on LCD. Press OK key to confirm. GP1260 IAX2 IP phone will reboot and come up with the factory default settings. 8.2 Store Defaults Settings 1. - Page 37 Annex: GP1260 IP phone digital-character key map Keys Once Twice Thrice quartic quintic sixth seventh eighth ninth ： space Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave., Futian District,Shenzhen ,China - 37 -...
Need help?
Do you have a question about the GP1260 and is the answer not in the manual?
Questions and answers