Summary of Contents for Wildwood Fireplace
- Page 1 Fireplace Owner’s Manual (800) 579.2797 (323)255.6578 Fax (323)306.5689 Info@wildwoodovens.com www.wildwoodovens.com 5050 La Roda Ave. Los Angeles, CA 90041...
- Page 2 Fireplace Assembly Instructions Toll Free Help Line 800 579.2797 Kit Contents: 3 base pieces 3 side wall pieces 3 flue pieces 1 Damper 2 Tubes Fireplace Cement...
- Page 3 B. Remove piece B and apply a thin coating of mortar on the area you have traced. Use the same mortar mixture (see page 1) to attach. Make sure base is level. 3. Place fireplace side walls C and back wall D over base B. Do not use mortar in these joints.
- Page 4 4. Apply mortar mix over top edges of side and back walls, in preparation to receive the hood pieces. Place the base of the hood E on top of side walls C making sure it is level and aligned with side walls. 5.
- Page 5 8. Place hood piece G over piece F in the same fashion as the last. Place the 2 refractory brick bases B2 and B3 over base B, without mortar. 9. Grout all internal joints of the fireplace with the refractory grout (supplied with the kit).
- Page 6 To Complete: Build a brick or concrete enclosure around fireplace, and then apply the finishing materials, such as tiles, stones, bricks, granite or marble. Chimney System: Chimney pipe diameter will vary depending on the length of the entire chimney.
Need help?
Do you have a question about the Fireplace and is the answer not in the manual?
Questions and answers