Playback Controls - Blaupunkt IP 240 Instruction Manual

IP 240
USB/DIGITAL CARD
It is possible to listen to audio files using the USB/CARD interface of this unit.
1. Connect the USB/CARD device to this unit.
2. Press the USB/SD button on the remote control to play the USB or CARD.
3. Press the or
button to go to the previous or next audio files.
4. To exit the USB/CARD mode: Press the iPod, AUDIO or FM button, and switch to
other modes.
Note:
1 Depending on the amount of data and media speed , it may take longer for system
to read the contents of media device. In some cases, reading time may be as long as
60 seconds. This is not a malfunction.
2 Even when they are in a supported format, some files may not play depending on
the content.
3 Connect your USB device directly to the USB port of the unit. Using an extension
cable is not recommended and may cause interference and failure of data transfer.
LISTENING TO iPod/iPhone
Connecting an iPod/iPhone to this unit
1. Remove the plastic cover from the dock.
2. Insert the iPod/iPhone to the dock. This unit is designed to make use of the adaptor
supplied with your iPhod/iPhone.
3. Press the iPod button on the remote control or on the unit, switch to iPhod mode.
When activating the iPod/iPhone mode, the screen will display＂Authenticating＂and
then "success".

Playback controls

During iPhod/iPhone playback some functions of this unit continue to operate the playback.
Below is a list of each fucntion and what it does.
PLAY/PAUSE: Press once to begin playback, press again to pause.
STOP: Stop playback.
ENTER: This button works as the select button on an iPhone.
/ : Skips to previous or next track.
MENU: Press this button to return to the main menu status.
DIRECTION BUTTON: Pressing these buttons will scroll up or down through the
iPod/iPhone menu.
SEARCH: When playing, work as the function of repeat the audio. Press once to repeat
once, twice to repeat all, and the third time to repeat off.
NOTE: During playback when a call comes, iPhone will automatically stop playing
the current files.
button to fast rewind or fast forward; Press the
50
or