Tools; Remote Access - Linksys NMH Series Quick Installation Manual

Tools

The Media Hub offers different ways to take advantage of its features.
Video Player Support
The Media Hub plays video content through a browser plug-in. Download and
install your favorite media player to enable video playback within the Media
Browser. Please note that media players have varying levels of support for
different video formats. If the video format you want to play is not supported,
you may want to search the Internet for a media player that can run on your
computer and support the desired video formats. (Make sure you download the
latest version.) Some suggested players include QuickTime, VLC, and Windows
Media Player.
For more information about video support, visit
http://www.linksysbycisco.com/support.

Remote Access

If you enable and set up the Remote Access service
Media Hub and its files over the Internet. To set up the Remote Access service,
follow these instructions:
1. In your web browser, enter
http://<Friendly_Name>
(Example: http://mediahub)
Configuration.
2. Click
3. Enter the password you created during the Setup Wizard (the default is
admin). Click Submit.
4. Click the
5. For the Remote Access section, click
6. Select
7. Enter the Remote Device Name you want to assign to the Media Hub. (This
name can be different from the Media Hub's Friendly Name.)
Submit.
8. Click
The Remote Access service will be available in approximately two to five
minutes. To remotely access the Media Hub, follow these instructions:
1. Open the web browser of the computer you are using.
Includes Remote Access service for one year from date of purchase. Fees may apply thereafter
†
and are subject to change. Go to www.linksysbycisco.com for further information.
12
Services tab.
Enable Remote Access to the Media Hub.
, then you can access the
†
Configure.
Media Hub