3.2.4. Custom IP Protocol Services
Example 3.9. Adding a IP Protocol Service
This example shows how to add an IP Protocol Service, with the Virtual Router Redundancy Protocol.
CLI
gw-world:/> add Service ServiceIPProto VRRP IPProto=112
Web Interface
1.
Go to Objects > Services > Add > IP protocol service
2.
Specify a suitable name for the service, for instance VRRP.
3.
Enter 112 in the IP Protocol control.
4.
Preferably, enter Virtual Router Redundancy Protocol in the Comments control.
5.
Click OK.
39
Chapter 3. Fundamentals