Adjusting The Volume; Connecting I903 To Your Audio Device - Iluv i903 Instruction Manual

Noise-Canceling Headset w/ Bluetooth wireless technology
OPERATING INSTRUCTIONS

Adjusting the Volume

To adjust the volume on the i903 (for both phone calls and music), adjust the volume
control buttons as shown below.
Right/rear view
Volume +
Volume -
1. Press the Volume + button to increase the volume during a phone call or while
listening to music.
2. Press the Volume – button to decrease the volume during a phone call or while
listening to music.

Connecting i903 to Your Audio Device

Using the USB cable provided, you can connect the i903 to your iPod
audio devices.
Plug USB cable into the USB jack located at the bottom of the right earphone on your
i903 (see illustration). Plug in the 3.5mm connector into your audio device. When
connecting headphones directly to an audio device, the Bluetooth wireless technology
functions are automatically disabled.
USB Jack
USB Cable
- 17 -
V10M10_IM_EN_12072006
®
or other stereo
3.5mm Connector
www.i-Luv.com