Prismasonic Cinoscreen F-100 Assembly Instructions

A Picture to
Remember
INSTALLATION INSTRUCTIONS
Carefully remove and unwrap all the contents of box. Referring to the parts list, make
sure you have everything needed to proceed with the installation of the screen. If any
parts are missing, contact Prismasonic immediately.
Inspect the screen to make sure there are no shipping defects. If you notice a problem
with the screen itself, or the screen's mechanical system, contact Prismasonic
immediately.
Video Screen
Assembly Instructions
Cinoscreen F-100 / F-AT100
Part List:
Screen Fabrics
Screen Fabric (F-AT models have two white woven fabrics included )
Back Fabric (F-AT models only, comes as a different package)
Wooden parts
Framework Bar (8 pcs)
Velvet Frames (6 pcs)
Corner Blocks (4 pcs)
Aluminum Brackets
Corner Bracket (4 pcs)
Extension Bracket (2 pcs)
Fabric Holder (22 pcs, 116" || 22 pcs, 136" || 26 pcs, 156")
Fabric Holder with a Plate (4 pcs)
Frame Holder (18 pcs) (Do not exist if ordered with a masking system)
Frame Holder Plate (6 pcs) (Do not exist if ordered with a masking system)
Wall Mount (2 pcs)
Wall Mount Side (4 pcs)
Wall Plate (2 pcs)
Wall Plate Side (4 pcs)
Wall Socket, 16 mm (8 pcs)
Hardware
Set Screw, M4 x 30 (12 pcs) (Do not exist if ordered with a masking system)
Set Screw, M6 x 30
Set Screw, M8 x 6 (4 pcs)
Washer , M10
Hex Nut , M10
Cap Screw, M4 x 35 (6 pcs) (Do not exist if ordered with a masking system)
Cap Screw, M6 x 16 (8 pcs)
Cap Screw, M6 x 25 (18 pcs) (Do not exist if ordered with a masking system)
Cap Screw, M8 x 50 (4 pcs)
Torx Screw, 5 x 30, black (42 pcs || 36 pcs if ordered with a masking system)
Tools
L-wrench, 3 mm
L-wrench, 4 mm
L-wrench, 6 mm
Driver, Torx
Spanner Wrench, adjustable
Staple Gun (F-AT models only)
Staples, 8 mm (F-AT models only)
------------------------------------------------------------
(26 pcs, 116" || 26 pcs, 136" || 30 pcs, 156")
(26 pcs, 116" || 26 pcs, 136" || 30 pcs, 156")
(26 pcs, 116" || 26 pcs, 136" || 30 pcs, 156")