Table of Contents
Advertisement
User Manual
8 Port BRI-U ISDN Simulator
Figure 2: ISDN Protocol Stack
Selecting a ISDN Switch type
To use ISDN simulator you must set the switch type. Use drop down menu in ISDN Manager application to
select appropriate BRI switch type. Selected BRI switch type must match the one configured on ISDN device.
Once that is done, you will always need to set the phone numbers (i.e., DN) and, if the configured switch type
requires it, the SPID numbers.
"Caller ID", or, in formal ISDN terminology, "calling number identification presentation", is always enabled and a
part of standard call setup procedure defined in Q.931 standard.
Chapter 3: Product Description
The Virtual Consoles ISDN simulator provides a "Telco in a box" for a variety of device testing scenarios
including ISDN routers, modems, ISDN telephones, faxes and H.320 video conferencing stations Commercial
H.320 videoconferencing equipment will set up from one to four physical BRI Interfaces delivering up to
512kbps bandwidth for each site.
7
Advertisement
Table of Contents
