Do you have a question about the OT-860-1550-xx-SA-x-x and is the answer not in the manual?
Questions and answers
Summary of Contents for Taikan OT-860-1550-xx-SA-x-x
Page 1
USER MANUAL 1550nm Transmitter 919 E. 29th St. Lawrence, KS 66046 // tel: 1-800-255-0247 // fax: 785-841-9512 // email: support@taikan.com // www.taikan.com version: 062614 OT-860-1550-xx-SA-x-x...
Page 2
Retain this manual for future reference. Taikan 1550nm Transmitter Owner’s Manual This manual is intended for use by purchasers of Taikan’s 1550 family of transmitters and their qualifi ed technicians. This document is the property of Taikan Company Inc. (“Taikan”) and embodies proprietary subject matter.
Please be cognizant of all safety guidelines and adhere to the recommendations listed. > Unauthorized alteration or inappropriate repair is NOT allowed and may cause irreparable damage to product. Taikan does not assume any responsibility for these modifi cations. Taikan // 919 E.
// INTRODUCTION PRODUCT SUMMARY The OT-860-1550-xx-SA-x-x (a 1550 nm optical transmitter) converts RF cable signals to fi ber signals, and distributes them throughout a HFC network. This unit is primarily used in upgraded cable television and fi ber distribution systems.
Pollution of the other optical components network, while the microprocessor monitors the output DC voltage. Please notify your Taikan representative (support@taikan.com) if any of the items appear lost or damaged. STATIC SENSITIVITY When opening or operating the product, please comply with standard static protection procedure, Prior to connecting the circuit, use the electric wire (#20 AWG or >) to connect the grounding screw on the bottom to...
– 192.168.000.001 > – 192.168.006.144 > – 192.168.006.144 *Information above is for reference only. The data will vary by unit. Taikan // 919 E. 29th St. Lawrence, KS 66046 tel: 1-800-255-0247 fax: 785-841-9512 email: support@taikan.com www.taikan.com 1550nm Transmitter | 11...
Note: The default OMI is set at AGC status. Taikan’s 1550 Transmitter is designed to be compatible with an EDFA amplifi er. The following factors The Optical modulation intensity (OMI) is set at the optimal level at the time of production. The should be taken into consideration when doing so: “Modulation Depth”...
Transmitter interface Warning: Amb temp low Check the surrounding temperature and continue monitor- time that would least affect your subscribers. Please contact your Taikan representative if this still does not resolve the situation. board temperature is low ing the device.
In no event shall Taikan be liable for any loss of profi ts, loss of use, interruption of business, or indirect, consequential damages of any kind. Taikan will not be liable for damages in any amount greater than the purchase price of the product.
Need help?
Do you have a question about the OT-860-1550-xx-SA-x-x and is the answer not in the manual?
Questions and answers