1. Manuals
  2. Brands
  3. Aplex Manuals
  4. Microphone
  5. ARCHMI-7XX
  6. User manual

Aplex ARCHMI-7XX User Manual

Hide thumbs Also See for ARCHMI-7XX:
Table of Contents

Advertisement

Quick Links

Download this manual
ARCHMI-7XX

User Manual

Release Date
_
Revision
Aug. 2014
V1.5
® 2014 Aplex Technology, Inc.
All Rights Reserved.
Published in
Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail:
aplex@aplex.com.tw
URL:
www.aplex.com.tw
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ARCHMI-7XX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aplex ARCHMI-7XX

Summary of Contents for Aplex ARCHMI-7XX

  • Page 1: User Manual

    ARCHMI-7XX User Manual Release Date Revision Aug. 2014 V1.5 ® 2014 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw...

  • Page 2: Warning!/Avertissement

    This information in this document is subject to change without notice. In no event shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or consequential, arising from either the use or misuse of information in this document or...

  • Page 3: Packing List/Safety Precautions/Consignes De Sécurité

    Packing List Accessories (as ticked) included in this package are: □ Adaptor □ Driver & manual CD disc □ Other.___________________(please specify) Safety Precautions Follow the messages below to prevent your systems from damage: ◆ Avoid your system from static electricity on all occasions. ◆...

  • Page 4: Table Of Contents

    Table of Contents___________________ Warning!/Avertissement!......…………………………….……..….2 Caution/Precaution/Disclaimer……………………………….…………………2 Packing List/Safety Precautions/Consignes de sécurité…..………………..3 Chapter 1 Getting Started 1.1 Specifications………………………...…………………………..6 1.2 Dimensions………………………………………...……………….9 1.3 Brief Description of ARCHMI Series……………………………15 1.4 Installation of HDD (ARCHMI-707/708)……………………..…18 1.5 Installation of HDD (ARCHMI-710)………………………..……20 1.6 Installation of HDD (ARCHMI-712/715/721)…………….…….21 Chapter 2 Hardware 2.1 Mainboard………………..…………………..………………..…..23 2.2 Installations…….……………………………..…………………...26...
  • Page 5 5.2.1 Software Functions (Resistive Touch)........91 5.2.2 Software Functions (Projected Capacitive)………….…..….102 Figures Figure 1.1: Dimensions of ARCHMI-707………………………………9 Figure 1.2: Dimensions of ARCHMI-708……………………………..10 Figure 1.3: Dimensions of ARCHMI-710……………………………..11 Figure 1.4: Dimensions of ARCHMI-712…………………..…………12 Figure 1.5: Dimensions of ARCHMI-715………………..……………13 Figure 1.6: Dimensions of ARCHMI-721……………….…………….14 Figure 1.7: Front View of ARCHMI Series……………………….…..15 Figure 1.8: Rear View of ARCHMI-707/ARCHMI-708..…...………..16 Figure 1.9: Rear View of ARCHMI-710……………………….………16...

  • Page 6: Chapter 1 1.1 Specifications

    Chapter 1 Getting Started 1.1 Specifications ARCHMI ARCHMI ARCHMI ARCHMI ARCHMI ARCHMI -707(P) -708(P) -710(P) -712(P) -715(P) -721(P) System Intel Atom Cedar View N2600 1.6GHz Dual Core Processors /Intel Atom D2550 1.8GHz(Optional for ARCHMI-712(P)/715(P) only) System Chipset Intel NM10 System Memory Onboard DDR3 2GB 800 MHz /4GB (Optional for ARCHMI-712(P)/715(P) only) IO Port...
  • Page 7 Environmental Operatiing 0~50℃ temperature(°C) Storage -20~60℃ temperature(°C) Storage humidity 10 to 90% @ 40°C, non- condensing Certification CE / FCC Class A Operating Windows XP pro, Windows XP Embedded, Windows Embedded CE6.0(Note 1), System Support Windows 7 pro for Embedded Windows Embedded standard 7(Win 7 support 3D Graphic function) Note 1: ARCHMI series is covered by one or more of the following patents: US6, 570, 884, US6,115,776, and US6,327,625.

  • Page 9: Dimensions

    1.2 Dimensions Figure 1.1: Dimensions of ARCHMI-707...

  • Page 10: Figure 1.2: Dimensions Of Archmi-708

    Figure 1.2: Dimensions of ARCHMI-708...

  • Page 11: Figure 1.3: Dimensions Of Archmi-710

    Figure 1.3: Dimensions of ARCHMI-710...

  • Page 12: Figure 1.4: Dimensions Of Archmi-712

    Figure 1.4: Dimensions of ARCHMI-712...

  • Page 13: Figure 1.5: Dimensions Of Archmi-715

    Figure 1.5: Dimensions of ARCHMI-715...

  • Page 14: Figure 1.6: Dimensions Of Archmi-721

    Figure 1.6: Dimensions of ARCHMI-721...

  • Page 15: Brief Description Of Archmi Series

    1.3 Brief Description of ARCHMI Series There are 7”, 8”, 10.1”, 12.1”, 15”, 21.5” Industrial Compact Size Panel PC in ARCHMI series, which comes with flat front panel touch screen and fanless design. It is powered by an Intel Atom N2600 1.6GHz CPU built-in, 2GB DDR III 800 MHz. Also, it can now be powered by Intel Atom D2550 1.8GHz(Optional for ARCHMI-712(P)/715(P) only) and 4GB (Optional for ARCHMI-712(P)/715(P) only).

  • Page 16: Figure 1.8: Rear View Of Archmi-707/Archmi-708

    Figure 1.8: Rear View of ARCHMI -707/ARCHMI -708 Figure 1.9: Rear View of ARCHMI-710...

  • Page 17: Figure 1.10: Rear View Of Archmi-712/Archmi-715

    Figure 1.10: Rear View of ARCHMI -712/ ARCHMI- 715 Figure 1.11: Rear View of ARCHMI-721...

  • Page 18: Installation Of Hdd (Archmi-707/708)

    1.4 Installation of HDD (ARCHMI-707 / ARCHMI-708) Step 1 There are 2 screws to deal with when enclosing or removing the chassis. Gently remove 2 screws. Step 2 There is a SSD card in the bracket. Gently remove the screw, then carefully pull SSD card.
  • Page 19 Step 4. You can replace SSD card by unscrewing 4 screws as shown in the picture. Note: 4 screws are packed in the packing list. Step 5 There is a SD card hole in the side of the machine. You can replace SD card from there.

  • Page 20: Installation Of Hdd (Archmi-710)

    1.5 Installation of HDD (ARCHMI-710) Step 1 There are 2 screws to deal with when enclosing or removing the chassis. Gently remove 2 screws. Step 2 Take the storage cover beside the Panel PC. Step 3 You can put or remove HDD into the machine by pulling the HDD bracket.

  • Page 21: Installation Of Hdd (Archmi-712/715/721)

    Step 4 There is a SD hole in the side of machine. You can replace SD card from there 1.6 Installation of HDD (ARCHMI-712 / ARCHMI-715 / ARCHMI-721) Step 1 There are 2 screws to deal with when enclosing or removing the chassis. Gently remove 2 screws.
  • Page 22 Step 2 You can put or remove HDD into the machine by pulling the HDD bracket. Step 3 You can remove HDD by unscrewing 4 screws in the HDD bracket. Note: 4 screws are packed in the packing package. Step 4 There is a SD hole in the side of machine.

  • Page 23: Chapter 2 Hardware

    Chapter 2 Hardware 2.1 Mainboard Specifications Board Size 170mm x 113mm CPU Support Intel Atom N2600 /1.60GHz (2cores,3.5W, onboard） Intel Atom D2550 /1.86GHz(2cores,10W, option) Chipset Intel NM10 Express Memory Support Onboard 2GB DDRIII SDRAM (N2600) Onboard 4GB DDRIII SDRAM (D2550) Graphics Integrated Intel GMA 3600 (N2600) Integrated Intel GMA 3650 (D2550)
  • Page 24 8-bit digital I/O by Pin header (CN2) Digital I/O 4-bit digital Input 4-bit digital Output 4-bit digital I/O by Pin header (CN3) Battery Support CR2477 Li battery by 2-pin header 2-bit digital Input Support Audio via Realtek ALC662 HD audio codec Audio 2-bit digital Output Support Line-in, Line-out, MIC by 2x6-pin header...

  • Page 25: Figure 2.1: Mainboard Dimensions

    (units :mm) Figure 2.1: Mainboard Dimensions...

  • Page 26: Installations

    2.2 Installations SBC-7106 is a 4" industrial motherboard developed on the basis of Intel Cedarview-M Processors and NM10, which provides abundant peripheral interfaces to meet the needs of different customers. Also, it features dual GbE ports, 3-COM ports and one Mini PCIE configuration,one VGA port, one HDMI port, one LVDS interface.

  • Page 27: Figure 2.3: Jumpers And Connectors Location_ Board Bottom

    Board Bottom Figure 2.3: Jumpers and Connectors Location_ Board Bottom...

  • Page 28: Jumpers Setting And Connectors

    2.3 Jumpers Setting and Connectors 1. JP5: (2.0mm Pitch 1X2 box Pin Header),ATX Power and Auto Power on jumper setting. Mode Open ATX Power Close Auto Power on (Default) 2. JP3: (2.0mm Pitch 1X2 Pin Header)CMOS clear jumper, CMOS clear operation will permanently reset old BIOS settings to factory defaults.
  • Page 29 Pin2 Ground Pin3 Model DC_IN1 SBC-7106-N2600 180°Connector SBC-7106-N2600-P 45°Connector SBC-7106-D2550 45°Connector 5. CPU_FAN1: (2.54mm Pitch 1x3 Pin Header),Fan connector, cooling fans can be connected directly for use. You may set the rotation condition of cooling fan in menu of BIOS CMOS Setup. Pin# Signal Name Ground...
  • Page 30 7. HDMI1: (HDMI 19P Connector), High Definition Multimedia Interface connector. 8. JP1: (2.0mm Pitch 2x3 Pin Header),COM1 jumper setting, pin 1~6 are used to select signal out of pin 9 of COM1 port. JP1 Pin# Function Close 1-2 COM1 RI (Ring Indicator) (default) Close 3-4 COM1 Pin9=+5V (option)
  • Page 31 Step 2: Remove the storage cover Step 3: Unscrew the storage tray Step 4: Remove the storage tray...
  • Page 32 Step 5: The function switch setting shows up 10. S_422: (Switch),COM1 setting, it provides selectable RS232 or RS422 or RS485 serial signal output. Function S_422 Pin# RS232 OFF: (Default) Pin1, Pin2, Pin3, Pin4 RS422 (option) Pin1, Pin2, Pin3, Pin4 RS485 (option) Pin1, Pin2, Pin3, Pin4 11.
  • Page 33 RS232 (Default): Pin# Signal Name DCD# (Data Carrier Detect) RXD (Received Data) TXD (Transmit Data) DTR (Data Terminal Ready) Ground DSR (Data Set Ready) RTS (Request To Send) CTS (Clear To Send) JP1 select Setting (RI/5V/12V) BIOS Setup： Advanced/W83627UHG Super IO Configuration/Serial Port 1 Configuration【RS-232】...
  • Page 34 12. JP2: (2.0mm Pitch 2x3 Pin Header),COM2 jumper setting, pin 1~6 are used to select signal out of pin 9 of COM2 port. JP2 Pin# Function Close 1-2 COM2 RI (Ring Indicator) (default) Close 3-4 COM2 Pin9=+5V (option) Close 5-6 COM2 Pin9=+12V (option) 13.
  • Page 35 16. LED3 Power status. LED STATUS. Green LED for Touch 17. SATA_P: (2.5mm Pitch 1x2 box Pin Header), Two onboard 5V output connectors are reserved to provide power for SATA devices. Pin# Signal Name +DC5V Ground Note: Output current of the connector must not be above 1A. 18.
  • Page 36 23. LINE_OUT: (Diameter 3.5mm Jack), HD Audio port, An onboard Realtek ALC662 codec is used to provide high quality audio I/O ports. Line Out can be connected to a headphone or amplifier. 24. USB45 USB4/USB5：(Double stack USB type A), Rear USB connector, it provides up to 4 USB2.0 ports, High-speed USB 2.0 allows data transfers up to480 Mb/s ,support USB full-speed and low-speed signaling.
  • Page 37 Function Signal Name Pin# Signal Name Function 12V_S0 12V_S0 BKLT_EN_OUT BKLT_CTRL Ground Ground LVDS_VDD5 LVDS_VDD5 LVDS_VDD3 LVDS_VDD3 LVDS LVDS Ground Ground LA_DATAP0 LA_DATAN0 LA_DATAP1 LA_DATAN1 LA_DATAP2 LA_DATAN2 LA_DATAP3 LA_DATAN3 LA_CLKP LA_CLKN Ground Ground Ground Ground USB1 USB1_P USB1_N USB1 USB0 USB0_P USB0_N USB0...
  • Page 38 30. CN2 (DF13-20P Connector),For expand output connector, It provides eight GPIO,one RS422 or RS485. Function Signal Name Pin# Signal Name Function 5V_S5 5V_S5 SIO_GPIO61 GPIO_IN2 GPIO_IN1 SIO_GPIO60 SIO_GPIO63 GPIO_IN4 GPIO_IN3 SIO_GPIO62 Ground Ground SIO_GPIO21 GPIO_OUT2 GPIO_OUT1 SIO_GPIO20 SIO_GPIO23 GPIO_OUT4 GPIO_OUT3 SIO_GPIO22 Ground Ground...
  • Page 39 GPIO24 ICH_GPIO24 ICH_GPIO13 GPIO13 GPIO26 ICH_GPIO26 ICH_GPIO27 GPIO27 Ground Ground PE1_TX_N0 PE1_TX_P0 PE1_RX_N0 PE1_RX_P0 PCIE PCIE Ground Ground CLK_100M_PE1_P CLK_100M_PE1_N PLTRST_BUF- PM_PCIE_WAKE SMBUS SMB_CLK_S5 SMB_DATA_S5 SMBUS PCIE PE1_CLKREQ Ground 3P3V_S5 PWRBTN_ON- 3P3V_S5 3P3V_S5 12V_S0 12V_S0 32. H3/H4/H5/H6: CPU1 and U53 Heat Sink SCREW HOLES, Four screw holes for intel N2600 and NM10 Heat Sink assemble.
  • Page 40 30x50.95mm. Signal Name Function support PCIe 1X USB2.0 (USB2) SMBus H1/H2: MPCIE1 SCREW HOLES, H2 for mini PCIE card (30mmx30mm) assemble. H1 for mini PCIE card (30mmx50.95mm) assemble. LED1： Mini PCIe devices LED Status. SIM1： (SIM Socket 6 Pin), Support SIM Card devices. PS2：...
  • Page 41 USB3_N USB2_N（option, NC） USB3_P USB2_P（option, NC） Ground Ground Ground Note: Before connection, make sure that pinout of the USB Cable is in accordance with that of the said tables. Any inconformity may cause system down and even hardware damages. JP5： (2.0mm Pitch 2x3 Pin Header),COM5 setting jumper, pin 1~6 are used to select signal out of pin 9 of COM5 port.
  • Page 42 JP6 Pin# Function Close 1-2 RI (Ring Indicator) (default) Close 3-4 COM6 Pin9=+5V (option) Close 5-6 COM6 Pin9=+12V (option) COM6： (Type DB9),serial port, standard DB9 serial port is provided to make a direct connection to serial devices. COM6 port is controlled by pins No.1~6 of JP6,select output Signal RI or 5V or 12v, For details, please refer to description of JP6.
  • Page 43 CN3： (1.27mm Pitch 2X30 Pin Header),connect to SBC-7106 CN3 pin Header. LED1： Mini PCIe devices LED Status. PS2： (2.0mm Pitch 1X6 Pin Wafer), PS/2 keyboard and mouse port, the port can be connected to PS/2 keyboard or mouse via a dedicated cable for direct used. Pin# Signal Name KBDATA...
  • Page 44 USB_23： (2.0mm Pitch 2x5 Pin Header) ,Front USB connector, it provides one USB port via a dedicated USB cable, speed up to 480Mb/s. Signal Name Pin# Pin# Signal Name 5V_USB23 5V_USB23 USB3_N USB2_N USB3_P USB2_P Ground Ground Ground Note: Before connection, make sure that pinout of the USB Cable is in accordance with that of the said tables.
  • Page 45 JP6： (2.0mm Pitch 2x3 Pin Header),COM6 setting jumper, pin 1~6 are used to select signal out of pin 9 of COM6 port. JP6 Pin# Function Close 1-2 RI (Ring Indicator) (default) Close 3-4 COM6 Pin9=+5V (option) Close 5-6 COM6 Pin9=+12V (option) COM6：...
  • Page 46 36. TB-528C1U2P1（option）: SBC-7106 Riser Card,TB-528C1U2P1 CN3 connect to SBC-7106 CN3 pin Header. TB-528C1U2P1 Top： CN3： (1.27mm Pitch 2X30 Pin Header),connect to SBC-7106 CN3 pin Header. M-PCIE1： (Socket 52Pin),mini PCIe socket, it is located at the top, it supports mini PCIe devices with Smbus,SIM and PCIe signal.
  • Page 47 PS_ON Mode Close 1-2 Auto Power on (Default) Open 1-2 ATX Power PS_ON2（option）： (2.0mm Pitch Wafer),They can used directly cable connection SBC-7106 JP5. PS_ON2 SBC-7106 R1.10 /JP5 Pin1 Pin1 Pin2 Pin2 PS2： (2.0mm Pitch 1X6 Pin Wafer), PS/2 keyboard and mouse port, the port can be connected to PS/2 keyboard or mouse via a dedicated cable for direct used.
  • Page 48 USB_23（option）： (2.0mm Pitch 2x5 Pin Header) ,Front USB connector, it provides one USB port via a dedicated USB cable, speed up to 480Mb/s. Signal Name Pin# Pin# Signal Name 5V_USB23 5V_USB23 USB3_N USB2_N USB3_P USB2_P Ground Ground Ground Note: Before connection, make sure that pinout of the USB Cable is in accordance with that of the said tables.
  • Page 49 JP6： (2.0mm Pitch 2x3 Pin Header),COM6 setting jumper, pin 1~6 are used to select signal out of pin 9 of COM6 port. JP3 Pin# Function Close 1-2 RI (Ring Indicator) (default) Close 3-4 COM6 Pin9=+5V (option) Close 5-6 COM6 Pin9=+12V (option) COM6：...
  • Page 50 CN3： (1.27mm Pitch 2X30 Pin Header),connect to SBC-7106 CN3 pin Header. M-PCIE1： (Socket 52Pin),mini PCIe socket, it is located at the top, it supports mini PCIe devices with Smbus,USB2.0,SIM and PCIe signal. MPCIe card size is 30x30mm or 30x50.95mm. Signal Name Function support PCIe 1X USB2.0 (USB2)
  • Page 51 Pin# Signal Name KBDATA MSDATA Ground KBCLK MSCLK USB_IN（option）： (2.0mm Pitch 2x5 Pin Header) ,Front USB connector, it provides two USB port via a dedicated USB cable, speed up to 480Mb/s. Signal Name Pin# Pin# Signal Name 5V_USB23 5V_USB23 NC (USB3_N) NC (USB2_N) NC (USB3_P) NC (USB2_P)
  • Page 52 Signal Name Pin# Pin# Signal Name Ground JP6 Setting：RI/5V/12V COM5： (2.0mm Pitch 2X5 Pin Header),COM5 Port, up to one standard RS232 port are provided. They can be used directly via COM cable connection. Signal Name Pin# Pin# Signal Name Ground GPIO1：...
  • Page 53 Shield cable (FG) Terminal resistor R+( internally connected to CANH2) CANH2 CAN bus Signal H CANL1 CAN bus Signal L Terminal resistor R-(internally connected to CAN1 CANL1) Shield cable (FG) Terminal resistor R+( internally connected to CANH1) CANH1 CAN bus Signal H 【See TB-528AN2 Manual】...

  • Page 54: Chapter 3 Bios Setup

    Chapter 3 BIOS Setup 3.1 Operations after POST Screen After CMOS discharge or BIOS flashing operation, press [Delete] key to enter CMOS Setup. Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc. BIOS Date: 03/09/2013 00:24:49 Ver: 7106V007 Press 〈DEL〉or〈F2〉to enter setup After optimizing and exiting CMOS Setup, the POST screen displayed for the first time is as follows and includes basic information on BIOS, CPU, memory, and storage devices.

  • Page 55: Main Settings

    Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit BIOS Information Intel Reference Code BIOS Vendor American Megatrends Version Core Version 4.6.5.3 Compliancy UEFI 2.3; PI 1.2 Project Version 7106V007 Build Date and Time 03/09/2013 00:24:49 ►Intel RC Version →←: Select Screen...

  • Page 56: Advanced Settings

    Minute : 0 to 59 Second : 0 to 59 System Date: Set the system date, the date format is: Note that the ‘Day’ automatically changes when you set the Day: date. Month: 01 to 12 Date: 01 to 31 Year: 1998 to 2099 3.4 Advanced Settings...
  • Page 57 [248 PCI Bus Clocks] VGA Palette Snoop: [Disabled] [Enabled] PERR# Generation: [Disabled] [Enabled] SERR# Generation: [Disabled] [Enabled] 3.4.2 ACPI Settings Enable ACPI Auto Conf: [Disabled] [Enabled] Enable Hibernation: [Enabled] [Disabled] ACPI Sleep State: [Both S1 and S3 available for OS to choose from ] [Suspend Disabled] [S1 only(CPU Stop Clock) ] [S3 only (Suspend to RAM) ]...
  • Page 58 Microcode Revision L1 Cache RAM 2x56 k L2 Cache RAM 2x512 k Processor Core Dual Hyper-Threading Supported Hyper-Threading: [Enabled] [Disabled] Execute Disable Bit: [Enabled] [Disabled] Limit CPUID Maximum: [Disabled] [Enabled] 3.4.4 Thermal Configuration CPU Thermal Configuration DTS SMM [Disabled] [Enabled] Platform Thermal Configuration Critical Trip Point [POR] Active Trip Point Lo [55 C]...
  • Page 59 USB Configuration USB Devices: 1 Drive ，1 keyboard Legacy USB Support: [Enabled] [Disabled] EHCI Hand-off: [Disabled] [Enabled] USB hardware delays a USB transfer time-out: [20 sec] [10 sec] [5 sec] [1 sec] Device reset time-out: [20 sec] [10 sec] [30 sec] [40 sec] Device power-up delay [Auto]...
  • Page 60 System temperature1 System Speed VCORE : +0.968 V +12V +12.302 V +3.3V +3.320 V +1.5V +1.528 AVCC +5.203 VCC5V +5.216 VSB5 +5.203 VBAT +3.334 V 3.4.9 Serial Port Console Redirection COM0 Console Redirection [Enabled] [Disabled] Console Redirection Settings Serial Port for Out-of-Band Management/ Windows Emergency Management Services (EMS) Console Redirection [Disabled]...
  • Page 61 [Disabled] CPU C6 State [Enabled] [Disabled] C4 Exit Timing [Fast] [Default] [Slow] C-state POPDOWN [Enabled] [Disabled] C-state POPUP [Enabled] [Disabled]...

  • Page 62: Chipset Settings

    3.5 Chipset Settings Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Host Bridge Parameters ►Host Bridge ►South Bridge →←: Select Screen ↑↓ : Select Item Enter: Select +/- : Charge Opt. F1 : General Help F2: Previous Values F3:Optimized Defaults...
  • Page 63 [Disabled] Max TOLUD [Dynamic] [1GB] [1.25GB] [1.5GB] [1.75GB] [2GB] [2.25GB] [2.5GB] [2.75GB] [3GB] [3.25GB] Intel IGD Configuration IGFX – Boot Type [VBIOS Default] [VGA] [LVDS] [HDMI] [VGA + LVDS] [VGA + HDMI] [LVDS + HDMI] LCD Panel Type [VBIOS Default] [640x480，18bit] [800x480，18bit] [800x600，18bit]...
  • Page 64 [Maintain Aspect Ratio] Active LFP [LVDS] [No LVDS] [EDP] IGD Clock Source [External Clock] [Internal Clock] Fixed Graphics Memory [128MB] [256MB] ALS Support [Disabled] [Enabled] Back light Control [DC] [PWM] Back light Logic [Positive] [Negative] Back light Control Lev [Auto] [Disabled] [Level 8] [Level 1]...

  • Page 65: Boot Settings

    [Enabled] [Disabled] PCI-Exp. High Priorit [Disabled] [Enabled] High Precision Event Timer Configuration High Precision Timer [Enabled] [Disabled] SLP_S4 Assertion Widt [1-2 Seconds] [2-3 Seconds] [3-4 Seconds] [4-5 Seconds] 3.6 Boot Settings Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset...
  • Page 66 Setup Prompt Timeout Bootup Numlock State [On] [off] Quiet Boot [Disabled] [Enabled] Fast Boot [Enabled] [Disabled] Skip VGA [Enabled] [Disabled] Skip USB [Disabled] [Enabled] Skip PS2 [Disabled] [Enabled] CSM16 Module Version 07.69 Gatea20 Active [Upon Request] [Always] Option ROM Messages [Force BIOS] [Keep Current] Interrupt 19 Capture...

  • Page 67: Security Settings

    [UEFI only] Launch PXE OpROM poli [Do not Launch] [UEFI only] [Legacy only] Launch Storage OpROM [Legacy only] [Do not Launch] [UEFI only] Launch Video OpROM po [Do not Launch] [UEFI only] [Legacy only] Other PCI device ROM [UEFI OpROM] [Legacy OpROM] 3.7 Security Settings Aptio Setup Utility –...

  • Page 68: Save And Exist Settings

    Type the password with up to 20 characters and then press key. This will clear all previously typed CMOS passwords. You will be requested to confirm the password. Type the password again and press key. You may press key to abandon password entry operation.
  • Page 69 Save Changes and Exit Save & Exit Setup save Configuration and exit ? [Yes] [No] Discard Changes and Ext Exit Without Saving Quit without saving? [Yes] [No] Save Changes and Reset Save & reset Save Configuration and reset? [Yes] [No] Discard Changes and Reset Reset Without Saving Reset without saving? [Yes]...

  • Page 70: Chapter 4 Installation Of Drivers

    VGA driver, LAN drivers, Audio driver Installation instructions are given below. Important Note: After installing your Windows operating system, you must install first the Intel Chipset Software Installation Utility before proceeding with the installation of drivers. ARCHMI-7XX User Manual...

  • Page 71: Intel Chipset Driver

    4.1 Intel Chipset Driver To install the Intel chipset driver, please follow the steps below. Step 1. Select Intel (R) Chipset NM10 Express from the list Step 2. Click Next to setup program. ARCHMI-7XX User Manual...
  • Page 72 Step 3. Read the license agreement. Click Yes to accept all of the terms of the license agreement. Step 4. Click Next to continue. ARCHMI-7XX User Manual...
  • Page 73 Step 5. Click Next. Step 6. Select Yes, I want to restart this computer now. Click Finish, then remove any installation media from the drives. ARCHMI-7XX User Manual...

  • Page 74: Intel Graphics Media Accelerator Driver

    4.2 Intel Graphics Media Accelerator Driver To install the VGA drivers, follow the steps below to proceed with the installation. Step 1.Select Intel(R) VGA Chipset Driver. Step 2. Tick Automatically run WinSAT and enable the Windows Aero desktop theme(if supported). Click Next. ARCHMI-7XX User Manual...
  • Page 75 Step 3. Read license agreement. Click Yes. Step 4. Click Next. ARCHMI-7XX User Manual...
  • Page 76 Step 5. Click Next. Step 6. To restart the computer, select Yes, I want to restart this computer now. Then click Finish. ARCHMI-7XX User Manual...

  • Page 77: Intel (R) Network Adapter

    4.3 Intel (R) Network Adapter To install the Intel (R) Network Adapter device driver, please follow the steps below. Step 1. Select Realtek RTL8111D Driver. Step 2. Click Next to continue. ARCHMI-7XX User Manual...
  • Page 78 Step 3. Click Install to begin the installation. Step 4. Click Finish to exist the wizard. ARCHMI-7XX User Manual...

  • Page 79: Realtek Alc662 Hd Audio Driver Installation

    4.4 Realtek ALC662 HD Audio Codec Driver Installation To install the Realtek ALC662 HD Audio Codec Driver, please follow the steps below. Step 1. Select Realtek AL662 Audio Codec Driver from the list Step 2. Click Next to continue. ARCHMI-7XX User Manual...
  • Page 80 Step 3. Click Yes, I want to restart my computer now. Click Finish to complete the installation. ARCHMI-7XX User Manual...

  • Page 81: Chapter 5 Touch Screen Installation

    If you have an older version of the PenMount Windows 2000/WIN7 driver installed in your system, please remove it first. Follow the steps below to install the PenMount DMC6000 Windows 2000/WIN7 driver. Step 1. Insert the product CD, the screen below would appear. Click touch panel driver. ARCHMI-7XX User Manual...
  • Page 82 Step 2. Select Resistive Touch. Step 3. Click Next to continue. ARCHMI-7XX User Manual...
  • Page 83 Step 4. Read the license agreement. Click I Agree to agree the license agreement. Step 5. Choose the folder in which to install PenMount Windows Universal Driver. Click Install to start the installation. ARCHMI-7XX User Manual...
  • Page 84 Step 6. Wait for installation. Then click Next to continue. Step 7. Click Continue Anyway. ARCHMI-7XX User Manual...

  • Page 85: Installing Software -Projected Capacitive

    Step 8. Click Finish to complete installation. 5.1.2 Installing Software -Projected Capacitive Step 1. Insert the product CD, the screen below would appear. Click touch panel driver. ARCHMI-7XX User Manual...
  • Page 86 Step 2. Select Projected Capacitive. Step 3. Click Next to continue. ARCHMI-7XX User Manual...
  • Page 87 Step 4. Select I accept the terms of the license agreement. Click Next. Step 5. Tick Install RS232 interface driver. Click Next. ARCHMI-7XX User Manual...
  • Page 88 Step 6. Select None. Click Next. Step 7. Click OK. Step 8. Tick Support Muti-Monitor System. Click Next. ARCHMI-7XX User Manual...
  • Page 89 Step 9. Go to C:\Program Files\eGalaxTouch. Click Next. Step 10. Click Next. ARCHMI-7XX User Manual...
  • Page 90 Step 11. Tick Create a eGalaxTouch Utility shortcut on desktop. Click Next. Step 12. Wait for installation. ARCHMI-7XX User Manual...

  • Page 91: Software Functions

    The functions of the PenMount Control Panel are Device, Multiple Monitors ,Tools and About, which are explained in the following sections. Device In this window, you can find out that how many devices be detected on your system. ARCHMI-7XX User Manual...
  • Page 92 E.g. Please run ms-dos prompt or command prompt c:\Program Files\PenMount Universa Driver\Dmcctrl.exe -calibration 0 ( Standard Calibration) Dmcctrl.exe - calibration ($) 0= Standard Calibration 4=Advanced Calibration 4 9=Advanced Calibration 9 16=Advanced Calibration 16 25=Advanced Calibration 25 ARCHMI-7XX User Manual...
  • Page 93 Step 1. Please select a device then click “Configure”. You can also double click the device too. Step 2.Click “Standard Calibration” to start calibration procedure ARCHMI-7XX User Manual...
  • Page 94 NOTE: The older the touch screen, the more Advanced Mode calibration points you need for an accurate calibration. Use a stylus during Advanced Calibration for greater accuracy. Please follow the step as below: Step 3.Come back to “PenMount Control Panel” and select Tools then click Advanced Calibration. ARCHMI-7XX User Manual...
  • Page 95 Step 4. Select Device to calibrate, then you can start to do Advanced Calibration. NOTE: Recommend to use a stylus during Advanced Calibration for greater accuracy. ARCHMI-7XX User Manual...
  • Page 96 Setting ARCHMI-7XX User Manual...
  • Page 97 About This panel displays information about the PenMount controller and driver version. ARCHMI-7XX User Manual...
  • Page 98 Enable the multiple display function as follows: 1. Check the Enable Multiple Monitor Support box; then click Map Touch Screens to assign touch controllers to displays. ARCHMI-7XX User Manual...
  • Page 99 5. Select a display and execute the “Calibration” function. A message to start calibration appears. Click OK. 6. “Touch this screen to start its calibration” appears on one of the screens. Touch the screen. 7. “Touch the red square” messages appear. Touch the red squares in sequence. ARCHMI-7XX User Manual...
  • Page 100 This panel displays information about the PenMount controller and this driver version. PenMount Monitor Menu Icon The PenMount monitor icon (PM) appears in the menu bar of Windows 2000/WIN7 system when you turn on PenMount Monitor in PenMount Utilities. ARCHMI-7XX User Manual...
  • Page 101 2. Choose the rotate function (0°, 90°, 180°, 270°) in the 3rd party software. The calibration screen appears automatically. Touch this point and rotation is mapped. NOTE: The Rotate function is disabled if you use Monitor Mapping ARCHMI-7XX User Manual...

  • Page 102: Software Functions -Projected Capacitive

    5.2.2 Software Functions -Projected Capacitive General In this window, you can see there is USB Controller. Click OK to continue. Monitor Mapping to adjust touch panel to search for device ARCHMI-7XX User Manual...
  • Page 103 Beep Beep On Touch Beep On Release Beep From System Beep Beep From Sound Card Linearization Style 9 points 25 points Double Click Time Shorter Longer Double Click Area Smaller Bigger Normal mode Simulate the mouse mode ARCHMI-7XX User Manual...
  • Page 104 Option Function Enable Constant Touch Enable Auto Right Click Enable Touch Enable Cursor Stabilization Constant Touch Area Auto Right Click Time ARCHMI-7XX User Manual...
  • Page 105 Do 4 points alignment to match display. Clear and Calibrate Clear linearization parameter and do 4 points alignment. Linearization Do 9 points linearization for better touchscreen linearity. Draw Test Do draw test to verify the touch accuracy. ARCHMI-7XX User Manual...
  • Page 106 Display In this window, it shows the mode of display. Enable Multiple Monitors. Map to main display if system has only one display monitor Full Screen Lower Screen Left Screen Upper Screen Right Screen ARCHMI-7XX User Manual...
  • Page 107 Other Other mode of display. Quarter1~4 and Customized area. Active Area Drag active area to enable Active Area Function. ARCHMI-7XX User Manual...
  • Page 108 Hardware Saturn Hardware Configuration ARCHMI-7XX User Manual...
  • Page 109 About To display information about eGalaxTouch and its version. ARCHMI-7XX User Manual...

Table of Contents