Front Lens Removal And Cleaning - Philips VLX User Manual

Front Lens Removal and Cleaning

Tools:
• #2 Phillips screwdriver
• Slotted Screwdriver
• Refer to the list of cleaning materials in
WARNING: Ensure that power is completely removed from luminaire before attempting any work.
Always wear eye protection and proper gloves when performing this procedure.
To clean from lens assembly and optics:
Step 1. Remove power from luminaire and allow unit to completely cool.
Step 2. Carefully set luminaire on upper enclosure, rotate head as shown in
tilt lock.
CAUTION:
Front Head Cover
Front Cover Latch
(one on each side of cover)
Upper Enclosure
Step 3. Remove front head cover by unlatching both head cover latches. Please note that one side of
front cover is secured by a safety tether. Locate clip attached to luminaire and unclip tether.
02.96 90.000 1 0
Remove power and
allow fixture to cool.
Figure A-1: VLX™ Wash Luminaire
07 Au gu st 2009 (Pre limina ry)
T
ROUBLESHOOTING AND
"Special Cleaning and Care Instructions" on page 54
M
AINTENANCE
Figure A-1, and engage
Luminaire Head
A
55