QooPro 12048 User Manual page 3

6. When the Play/Pause/Call button in the middle of the button panel
is flashing blue, you are now connected and can play your audio
content and answer calls wirelessly!
Connecting The OBA to your Audio Device via 3.5mm Audio
Cable:
1. Make sure the OBA is charged. Follow the instructions below
labelled "Recharging the built-in li-ion battery."
2. Turn the OBA on by flipping the switch labelled "ON/OFF" on the
back of the unit to the ON position.
3. Connect one end of the included 3.5mm audio cable to the "AUX
IN"port on the back of the unit. Connect the other end to the
3.5mm (headphone jack) of your audio device.
4. Make sure the volume of your audio device and the volume of the
OBA are both set to medium/low.
5. Play music on your device and slowly adjust the volume to the
desired level. You can adjust the volume either by pressing the
volume buttons on the OBA or your audio device. For best
audio results, turn your audio device all the way up and adjust the
OBA volume controls until the music sounds perfect.
Main LED Indicator (in the middle of the button panel):
What the various displays indicate: Button LED Off - Power off
Flashing blue/red - in Bluetooth pairing mode
Solid red - in AUX mode
Solid blue - paired to a Bluetooth device
Power LED Indicator (on the back of the speaker):
Red LED indicates the battery is being charged.
LED turns off during charging - battery is full
Last and Next
Short press the button located to the left to the button panel for last
song and right for the next song.
Volume Up and Down:
2