Installing Your Jetcard; Removing Your Jetcard - Korenix JetCard Series User Manual

Installing Your JetCard

Follow the steps below to install your JetCard.
1. Power off the PC.
2. Remove the PC case.
3. Remove the slot cover.
4. Insert the JetCard into the PCI card.
5. Tighten the JetCard with screws.
6. Place the PC case back.

Removing Your JetCard

1. Power off the PC.
2. Remove the PC case.
3. Remove the screws from the JetCard.
4. Remove the JetCard.
5. Place the PC case back.
Korenix JetCard Series Multiport Serial Card User's Manual 2-5
Hardware Installation