Unplugging The Hardware - Profitec Trend MT5075 User Manual

2. Select the default option icon to continue , until the
EN
setup wizard fi nished installing the USB disk, then
click [Finish] to restart computer.
3. When the installation is completed, the [Safe Re-
move] icon will appear on the taskbar when device
is connected.
Windows ME, 2000,XP, Vista
No extra driver is required to run under mentioned
systems. The system will detect an USB Mass Storage
4
Device and install the necessary drivers automatically
when you plug enclosure into your computer for
the fi rst time. Since then, device will be recognized
automatically when plugged in to the same USB port.
MAC OS
A. This external enclosure is supported by the Mass Stor-
age Support 1.3.5 in Mac OS, no driver is required.
B. On the Mac OS 8.6, the software Mass Storage Sup-
port 1.3.5 has to be installed. Please download it
from the website: www.apple.com
C. On the Mac OS 9.0 or above, no driver is required.
The hard drive will appear on desktop whenever is
plugged in.

Unplugging the hardware

Windows 98 SE
1. Make sure that all relative windows are closed and
all running applications that are stored on the exter-
nal drive are quitted.
2. Double click the Unplug or Eject hardware icon in
the taskbar and select the device that you want to
remove, and click [Safety Remove]