Showing On-Screen Display - JVC HR-VP48U Instructions Manual

Showing on-screen display

D
When "SUPERIMPOSE" is set to "ON" (
can see the current VCR status on the TV screen.
For more detailed information about the on-screen
display, see page 41.
1
Display VCR status on TV screen
During recording or
recording pause, press
OSD.
All indications
corresponding to the
current VCR status are
displayed for 5 seconds.
The time counter remains
on the screen indicating the elapsed time.
The indications are not recorded.
2
Erase on-screen display
Press OSD again.
NOTE:
If the VCR is in recording pause mode, "RECORD/PAUSE" is
always displayed.
The VCR status can be also displayed during playback.
pg. 33), you
CH 125 RECORD
THU 12:00 AM PAUSE
] SP
+ + +
B E
INDEX-1
COUNT –1:23:45
Other useful function for recording
You can also use the following function for recording.
Recording Resume Function
If there is a power outage during recording (or Instant
Timer Recording, or timer recording), the recording will
resume automatically when the power is restored to the
VCR. (No setting is required for this function.)
21
EN