Table of Contents
Advertisement
Quick Links
THANK YOU!
We are grateful for your purchase of Advanced Wireless Communications product. We believe this
easy-to-use radio will provide you with dependable and reliable communications. This Advanced
Wireless Communications portable two-way radio is a precision device. Treat it with care, and you
will enjoy years of reliable operation.
MODELS COVERED IN THIS MANUAL
I-Rad:
UHF 450-470 MHz
Model Number: 420855102108
I
Advertisement
Table of Contents
Summary of Contents for I-Rad 420855102108
- Page 1 This Advanced Wireless Communications portable two-way radio is a precision device. Treat it with care, and you will enjoy years of reliable operation. MODELS COVERED IN THIS MANUAL I-Rad: UHF 450-470 MHz Model Number: 420855102108...
- Page 2 Product Safety and RF Exposure for Portable Two-Way Radios Compliance with RF Energy Exposure Standards NOTICE: This radio is intended for use in occupational/controlled applications where users have been made aware of the potential for exposure and can exercise control over their exposure.
-
Page 3: Notices To The User
FCC license Information Your Advanced Wireless Communications radio operates on communications frequencies which are subject to FCC (Federal Communications Commission) Rules & Regulations. FCC Rules require that all operators using Private Land Mobile radio frequencies obtain a radio license before operating their equipment. - Page 4 SAFETY INFORMATION: Your wireless portable two-way radio has been designed using a low power transmitter. When the PTT switch is pressed, the radio generates radio frequency (RF) electromagnetic energy (EME). This radio is designed to comply with the FCC Report and Order FCC 96-326 (August, 1996).
-
Page 5: Table Of Contents
CONTENTS Thank You ........................I FCC Declaration ......................II – IV Contents ......................... V Introduction ........................Getting Acquainted ................…....1 Product Inspection …....................1 Transceiver Radio View ................... 2 Cradle Charger View ..................…... 3 Safety and Care Instructions ..................4 Safety Precautions .................... -
Page 6: Thank You
PRODUCT INSPECTION Thank you for your purchase of Advanced Wireless Communications portable two-way radio model: I-Rad 420855102108. Before use, please inspect the product as follows. First check the shipping carton for any signs of damage if any damage has occurred, please contact your dealer immediately. -
Page 7: Transceiver Radio View
TRANSCEIVER RADIO VIEW Front View: Headset Connector Connect headset for hands-free communication 2.5mm Jack PTT (Push to talk) Button Press and hold PTT, Transmit mode enabled. Release PTT, Receive mode enabled. LED indicator LED indication and corresponding radio status as follows: Radio status LED indication (normal voltage) LED indication (Low voltage) -
Page 8: Cradle Charger View
Back View: Belt Clip Used to clip the radio on your belt. Battery door Remove to access battery compartment. Battery pack Lithium 4.2V /1050mAH rechargeable battery pack. Charging Battery Contact Charging Battery CRADLE CHARGER VIEW Battery Slot Charges Battery Charging Indicator Radio Charging Indicator Radio Slot Charges Radio Unit... -
Page 9: Safety And Care Instructions
SAFETY AND CARE INSTRUCTIONS SAFETY PRECAUTIONS Please observe the following safety precautions when setting up and using this product. • Heat sources – Keep the product away from heat sources such as radiators, stoves, heaters, and other heat-generating products. • Water and moisture –... -
Page 10: Installing The Headset
more information. When the battery power is low, Red LED will flash, please charge it or replace it with a new one. To charge the battery: TIP Charge the battery for 12 hours on the first charge. After that, it should take 4 hours or less to charge. -
Page 11: Features And Operation
FEATURES AND OPERATION TURN THE UNIT ON / OFF NOTE Before using radio, confirm headset cable has been connected to the radio. To turn on Radio: Press and hold VOL “Power on” will sound and Green LED light will appear confirming your action. To turn off Radio: Press and hold VOL until you hear “Power off”... -
Page 12: Talk To Another Transceiver
TALK TO ANOTHER TRANSCEIVER To Transmit (Make a call): Press and hold PTT button, Speak into the microphone using your normal speaking voice. TIP Activate MONITOR Function: To avoid interfering with other users, make sure the channel is idle before transmitting by pressing and holding the CH button. -
Page 13: Auxiliary Functions
AUXILIARY FUNCTIONS TIME-OUT TIMER (TOT) Time-out Timer prevents the prolonged use of the same channel and energy waste resulting from continued transmission. If the radio continuously transmits signals for a period over the preset limit (set by your dealer, max time is 5 minutes), the transceiver will stop transmitting and a beep will sound. -
Page 14: Specifications
SPECIFICATIONS Operation frequency: 450-470 MHz Channels: 16 Max. (setting by PC programming) CTCSS/DCS codes: 38 CTCSS/ 83 DCS Modulation: FM (Narrow/Wide deviation) Sensitivity: -119 dBm ( -6 dBuV emf) Noise Squech: Auto (setting by PC programming) Audio output power: > 50 mW Audio distortion: <... -
Page 15: Appendix
Appendix Frequency Chart Model: Serial Number: Transmit Receive Receive Channel Transmit Frequency CTCSS/DCS Frequency CTCSS/DCS Advanced Wireless Communications endeavor to achieve the accuracy and completeness of this manual, but cannot guarantee its accuracy at all times. All the above specifications and design are subject to change by Advanced Wireless Communications without notice.
Need help?
Do you have a question about the 420855102108 and is the answer not in the manual?
Questions and answers