Toshiba AT10LE-A Series User Manual page 27

1. Eraser button
3. Pen point
Eraser button
Side button
Pen point
Observe the following precautions on the handling of the Stylus Pen.
User's Manual
In order to avoid damages to the display screen, please refrain from
doing anything other than the specified operation methods. Failure to
do so could cause a malfunction or characteristic deterioration.
Do not tap or press the Stylus Pen forcefully against the display as this
could damage the Stylus Pen and the screen itself.
Avoid using or keeping the Stylus Pen in areas where the temperature
can change rapidly or in places, such as a car, where the Stylus Pen
is exposed to direct sunlight. Store the Stylus Pen without any
pressure being applied to the buttons. Failure to do so could cause a
malfunction or characteristic deterioration.
The Stylus Pen is composed of precision parts. Do not drop the Stylus
Pen. Strong impact causes a malfunction or characteristic
deterioration.
Do not apply excessive force to the Stylus Pen point and the side
button. Excessive force applied to these parts causes short life or
characteristic deterioration.
Avoid water entering the Stylus Pen or condensation forming within it
as either condition will cause a malfunction.
Do not disassemble the Stylus Pen. It causes maladjustment or short
life.
Figure 4-1 Stylus Pen
1
2
3
2. Side button
You can use this button as an eraser in some
applications that support eraser function. These
applications enable you to select and delete
notes or sketches with a one-touch action.
You can use this button as function button. The
function will be defined by each application.
You can use pen point to operate same like as by
your finger.
4-2