DGF Fabrications Renaissance 16" User, Installation & Servicing Instructions page 14

WITH FRONT AND FRET IN POSITION
The second row of coals is placed in the
vie created by the first row. The coals are
placed so as to rest on the rear of the front
row and the coal supports. The coals
should be angled the opposite way to the
front row in order to maintain a random
coal effect.
3RD ROW
Fig 25
th
The 4 row of coals is placed in the "v"
rd
behind the 3 row of coals and in front
of the back wall. The coals are
Fig 23
Fig 24
2nd ROW
The third row of coals is placed behind
nd
the 2 row being supported by the
base-board and resting in the "v" formed by
nd
the 2 row of coals. Again the coals are
laid at an angle to the previous row with
the edges angled up as shown.
4TH ROW
NJL/GTECH- 3/10/06 Revision No.3
13