Upgrade By Usb; Backup To Usb - SuperMax TV User Manual

User manual [English]
We offer the functions for user to connecting
1
receiver (Master) to the other receiver
(Slave) via serial interface.
Connect master receiver to slave receiver
2
via serial interface. Enter "Software
Upgrade" menu in master receiver and
press[Volume Up/Volume Down]keys to
switch upgrade mode.
Upgrade modes include: program + code
/ code / Program List / user back / video
back / radio back / default DB and Default
DB+User DB
Turn on slave receiver and it needn't operate
3
any setting.
Moving highlight to "Start" on master receiver
4
and press[OK]key to start upgrade.
Press [Menu]key to save the parameters and
5
draw back.

10.5 Upgrade by USB

Note:
USB functions is available only after inserting
USB device, otherwise this menu is
deactivated.
In this menu you can upgrade the software from
USB conveniently, press ' OK ' button to enter.
NOTE:
You must put the upgrade files directly on the
USB partition of the USB storage, without any
directory.
In this menu you can select the Upgrade Mode
among All Code, Main Code, User logo, Menu
logo,Radio logo,Default
Allcode +bootloader, and you can select the
appropriate upgrade file on "Upgrade File" item.
After you select the "Upgrade Mode" and
"Upgrade File", press ' OK ' button on "Start"
item, the receiver can upgrade automatically.

10.6 Backup to USB

In this menu you can make a backup copy of your
software and data.
26
DB,User DB and